JÄMFÖRANDE PROVNING - GUMMIMATERIAL DEL 11: VÄRMEÅLDRING ENLIGT SIS 16 22 05 (ISO 188)
1988 (Swedish)Report (Refereed)
Abstract [en]
This project of interlaboratory tests was started in 1982 by the Polymer Laboratory at the Swedish National Testing Institute. The objective of the project is to investigate the precision of the most common rubber test methods, i. e. to determine the reproducibility (between labs) and the repeatability (within labs) of the test methods. As a guide for the project, the technical report ISO/TR 9272, prepared by ISO TC 45 Rubber and Rubber products has been used. This report, part 11, presents the results from an interlaboratory test according to SIS 16 22 05 (ISO 188), accelerated ageing. The report contains the results for sixteen Swedish laboratories. The results for the sixteen laboratories are seen in the table below, which shows the reproducability. For tensile strength and elongation at break it is expressed in % change and for hardness in IRHD-change after ageing. Reproducability, R (between labs): Ageing 70 °C tensile strength 19 %, elongation at break 19 %, hardness, mikro 7 IRHD. Ageing 100 °C tensile strength 15 %, elongation at break 16 %, hardness, mikro 10 IRHD. The project will continue and an interlaboratory test of Resistance to Liquids is taking place during 1988.
Place, publisher, year, edition, pages
Borås: Statens Provningsanstalt (SP) , 1988. , p. 32
Series
SP Rapport, ISSN 0284-5172 ; 1988:30
Keywords [en]
Rubber, Testing, Interlaboratory tests, Reproducability
National Category
Polymer Technologies
Identifiers
URN: urn:nbn:se:ri:diva-82974ISBN: 91-7848-111-2 (print)OAI: oai:DiVA.org:ri-82974DiVA, id: diva2:2110286
Note
SP Rapport 1988:30
2026-10-142026-10-142026-10-14Bibliographically approved