Based on polarization curves of pure iron recorded with the aid of a computer-controlled potentiostat and rotating disc electrodes, the following reaction scheme for the dissolution of iron in acid solutions has been suggested. The dissolution of iron follows two paths, a catalyzed and an uncatalyzed. A minor part of the surface known as defects catalyzes the reaction. The blocking of the catalyzing defects takes place through the adsorption of Fe(II)(OH)2 and Fe(II)(OH)3, which are both present in the double layer close to the defects. In parallel with the catalyzed dissolution mechanism occurring on the defects, iron is also dissolved on the regular part of the surface through an uncatalyzed reaction. A mechanism for the cathode reaction is also proposed. Equations corresponding to the suggested mechanisms have been formulated. The calculations of theoretical curves show good agreement with the observed results. The proposed mechanisms are hoped to be a fruitful basis for the explanation of the influence of solution and alloy composition on the corrosion rate of steel.