Demonterbarhet och återbrukbarhet för fastigheten Rotväven
2026 (Swedish)Report (Other academic)
Sustainable development
Industry, Innovation and Infrastructure
Abstract [en]
This report presents a practical example of a completed design calibration process applied to a timber structural system. The background is the increasing need for circular construction practices and for methods that can demonstrate whether a building has been designed for future deconstruction and reuse. There is currently no standardised approach for formulating or verifying such requirements. The aim of the study is therefore twofold: to assess the deconstructability and reusability of the structural system in the case building Rotväven, and to provide a concrete basis for discussing whether design calibration can serve as a reliable and transparent method for demonstrating compliance with deconstructability requirements.
The method used is Design Calibration, a structured process combining qualitative and quantitative steps. It includes defining scope and scenarios, assembling an expert team, analysing the intended design, conducting a facilitated workshop to simulate future deconstruction, and evaluating potential modifications. The process results in a verified design, shared knowledge among involved actors, and a plan for deconstruction and reuse.
The results show that the structural system is deconstructable, with one modification identified for future projects and additional areas requiring further investigation. The documentation produced through the process provides a clear account of the design basis, the assessments made, and the decisions taken.
The discussion highlights that design calibration may function both as a tool for developing technical solutions and as a basis for requirement-setting. It also raises questions for further dialogue with industry actors regarding the appropriate scope, content and transparency of documentation used to verify deconstructability and reusability.
Place, publisher, year, edition, pages
2026. , p. 35
Series
RISE Rapport ; 2026:90
Keywords [en]
design for deconstruction and reuse, design for disassembly, disassembly potential, case study, timber building, Rotväven
National Category
Construction Management
Identifiers
URN: urn:nbn:se:ri:diva-82698ISBN: 978-91-90193-20-4 (electronic)OAI: oai:DiVA.org:ri-82698DiVA, id: diva2:2099229
Note
Det här arbetet ingår i projektet ”Affärsmodell för flexibla, demonterbara, återbrukbara trähus”, finansierat av Vinnova och projektparterna.
Objektet kallat Rotväven benämndes under projektering och byggtid för Bokstödet 14. Båda betäckningarna förekommer i denna rapport.
Författare till rapporten är studiens processledare, båda på RISE Research Institutes of Sweden och vi har fördelat arbetet enligt:
Ylva Sandin har lett Affärsmodellsprojektet från start i november 2025 till september 2026, utvecklat designkalibreringsprocessen i tidigare forskningsprojekt, utformat manualen och mallen, varit huvudprocessledare, formulerat texten och ansvarar för den slutliga versionen.
Johan Bergssröm har deltagit i Affärsmodellsprojektet som hållbarhetsspecialist, bistått med synpunkter under utvecklingen av designkalibreringsprocessen i tidigare forskningsprojekt, varit biträdande processledare med sekreteraransvar vid workshop, och lämnat synpunkter i arbetets samtliga skeden.
Vi vill båda rikta ett varmt och innerligt tack till fallstudiens och affärsmodellsprojektets deltagare och finansiärer.
2026-09-072026-09-072026-09-08Bibliographically approved