This report presents a series of small-scale tests conducted within the Carbon diOxide Fire Fighting Experimental Evaluation (COFFEE) project to investigate the influence of carbon dioxide on lithium-ion battery fires and thermal runaway propagation. The work comprised preliminary cold discharge tests followed by two test series involving lithium-ion battery cells exposed to free-burn and fire-suppression conditions. The cold discharge tests were used to develop the test methodology and establish a carbon dioxide concentration of approximately 45 % within a customised test compartment. Four battery cell types were investigated, including prismatic nickel-manganese-cobalt oxide (NMC) cells, prismatic lithium iron phosphate (LFP) cells, and cylindrical NMC cells. Thermal runaway was initiated either by external heating or by nail penetration. Note: Despite repeated attempts, the LFP cells could not be successfully ignited and were therefore excluded from the tests. Free-burn tests were conducted to provide benchmark data, while suppression tests evaluated different carbon dioxide concentrations, corresponding to oxygen levels of approximately 11.5 % and 6.3 %. The results showed that carbon dioxide reduced fire severity when thermal runaway was initiated by external heating, particularly for the cylindrical cells. Peak temperatures were substantially reduced as oxygen concentrations decreased, indicating a suppression of flaming combustion and external heat transfer. For larger prismatic (NMC) cells, the reduction in fire severity was more limited, and no significant delay in thermal propagation was observed. When thermal runaway was initiated by nail penetration, carbon dioxide had little measurable effect on peak temperatures or propagation rates, suggesting that the process was dominated by internal exothermic reactions largely independent of the surrounding atmosphere. Overall, the effectiveness of carbon dioxide was found to depend strongly on battery design, propagation mechanisms, and the method used to initiate thermal runaway.
QC 20261015