Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Cyclic long-term testing of gas turbine burner materials in reducing environments at 700 °c
RISE - Research Institutes of Sweden, Material och produktion, KIMAB.
RISE - Research Institutes of Sweden, Material och produktion, KIMAB.ORCID-id: 0000-0002-2339-9443
2014 (Engelska)Ingår i: Materials and corrosion - Werkstoffe und Korrosion, ISSN 0947-5117, E-ISSN 1521-4176, Vol. 65, nr 2, s. 169-177Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Gas turbines operating under fuel-rich conditions may suffer from material degradation and metal dusting.To evaluate this cyclic exposures have been done at 700 °C during 5000 h in two synthetic environments having a carbon activity of 0.26 and above unity. It was found that the common stainless steel 304L is incapable of withstanding either of the environments, while the stainless steel 253MA performs well because a protective silica layer is formed. The ferritic alumina formers Kanthal APM and Kanthal APMT perform well, together with several commercial chromia forming Ni-base alloys. As a general trend the material degradation is slower in the environment with the higher carbon activity, but pre-oxidised samples of chromia forming alloys did experience sudden and rapid carburisation after scale failure. Also a TBC system failed earlier in this environment, because graphite formation at the top coat/bond coat interface caused spalling of the top coat. Further the MCrAlY bond coat cracked and caused carburisation of the underlying Ni-based substrate. A silicon modified aluminide coating showed good degradation resistance, but stimulated excessive carbon deposition in the environment of high carbon activity. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Ort, förlag, år, upplaga, sidor
2014. Vol. 65, nr 2, s. 169-177
Nationell ämneskategori
Materialteknik
Identifikatorer
URN: urn:nbn:se:ri:diva-12796DOI: 10.1002/maco.201307143Scopus ID: 2-s2.0-84900574925OAI: oai:DiVA.org:ri-12796DiVA, id: diva2:972989
Tillgänglig från: 2016-09-22 Skapad: 2016-09-22 Senast uppdaterad: 2023-06-07Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopushttp://onlinelibrary.wiley.com/doi/10.1002/maco.201307143/abstract

Person

Norling, Rikard

Sök vidare i DiVA

Av författaren/redaktören
Norling, Rikard
Av organisationen
KIMAB
I samma tidskrift
Materials and corrosion - Werkstoffe und Korrosion
Materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 26 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf