Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Numerical modelling of turning to find residual stresses
RISE, Swerea, Swerea KIMAB.
2013 (English)Conference paper, Published paper (Refereed)
Abstract [en]

In this study a thermo-mechanical numerical simulation of the machining operation is presented. The purpose of the simulations is to obtain the residual stresses. The FE-simulations are compared to measurements of a machined axis. The reason for this work is to see if residual stress calculations have reached a level where it could be performed on a daily basis. Therefore, the simulations were performed with the software package DEFORM which has a re-mesh function that, for practical reasons, is necessary when forming chips. The large deformations will make the FE-analysis to costly otherwise. The work includes a parametric study of machining parameters in order to foresee the impact on the residual stresses. These simulations have also been compared to measurements. The FE-simulations has proved to predict the residual stresses in principle. However, even though the stress gradient in the vicinity of the surface is captured the exact stress level on the surface could not be foreseen. This effect was attributed to the re-mesh function. The parametric study showed that residual stresses can be foreseen, but not all the way up to the surface. Simulated results are only valid from approx 0.05mm-0.1mm below the surface. However, even with this restriction the FE-analysis can be used for optimising the cutting parameters with respect to residual stresses. Copyright © 2013 Elsevier B.V.

Place, publisher, year, edition, pages
2013. Vol. 8, p. 258-264
Series
Procedia CIRP, ISSN 2212-8271
Keywords [en]
FE-simulation, Residual stresses, Turning
National Category
Materials Engineering
Identifiers
URN: urn:nbn:se:ri:diva-12927DOI: 10.1016/j.procir.2013.06.099OAI: oai:DiVA.org:ri-12927DiVA, id: diva2:973120
Conference
14th CIRP Conference on Modeling of Machining Operations, CIRP CMMO 2013, Turin, 13 June 2013 through 14 June 2013, 98195
Available from: 2016-09-22 Created: 2016-09-22Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full texthttp://www.scopus.com/inward/record.url?eid=2-s2.0-84881171964&partnerID=40&md5=bb2aa64506d20cef0bf67e8738c364c3
By organisation
Swerea KIMAB
Materials Engineering

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 11 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
v. 2.35.4