Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Damage to coated plastics pipes from trenchless laying techniques
RISE, SP – Sveriges Tekniska Forskningsinstitut, SP Sveriges tekniska forskningsinstitut, SP – Sveriges Tekniska Forskningsinstitut / Göteborg (BMg).
RISE, SP – Sveriges Tekniska Forskningsinstitut, SP Sveriges tekniska forskningsinstitut, SP – Sveriges Tekniska Forskningsinstitut / Göteborg (BMg).
2006 (English)Report (Refereed)
Abstract [en]

This project aims at evaluating an external coating on plastics pipes; and its protective function against scratches and scoring damage from trenchless laying techniques. PE100 pressure pipes with four different coatings were tested in horizontal drilling and pipe bursting field trials. During the tests, the lengthwise and cross-sectional deformations of the pipe were measured along with the traction force. The pipes’ surfaces were examined with respect to scratches, and the depth of the most prominent ones were determined. Of the two laying techniques, pipe bursting was the one that caused the deepest scratches. Horizontal drilling was not significantly worse than ordinary handling during transport and preparation with respect to scratch depth. Dragging of the pipe above ground on asphalt surfaces caused severe damage to the pipe wall. The deepest scratches were seen on two pipe selections with soft coatings. Due to their thickness, however, these coatings were not penetrated and thus successfully protected the main pipe wall. The hardest coating tested, made of polypropylene, was also the thinnest one, and it was penetrated at one location during the pipe bursting test. The traction force on the pipe was significantly higher during horizontal drilling than during pipe bursting. On the other hand, ovalisation of the pipe’s cross-section was greater during pipe bursting.

Place, publisher, year, edition, pages
2006.
Series
SP Rapport, ISSN 0284-5172 ; 2006:49
National Category
Natural Sciences
Identifiers
URN: urn:nbn:se:ri:diva-4743Local ID: 7243ISBN: 91-85533-37-8 (print)OAI: oai:DiVA.org:ri-4743DiVA, id: diva2:962381
Available from: 2016-09-07 Created: 2016-09-07 Last updated: 2020-12-01Bibliographically approved

Open Access in DiVA

fulltext(1640 kB)207 downloads
File information
File name FULLTEXT01.pdfFile size 1640 kBChecksum SHA-512
1d2ea3d00288c9c136abcb1e184de2d9a9cee9d86b0af4fdee1a3bb3eebe538ae4d93e0727e76030a5a3af71d47d11591f721712cdff9b377c3a29c4687028c3
Type fulltextMimetype application/pdf

By organisation
SP – Sveriges Tekniska Forskningsinstitut / Göteborg (BMg)
Natural Sciences

Search outside of DiVA

GoogleGoogle Scholar
Total: 215 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

isbn
urn-nbn

Altmetric score

isbn
urn-nbn
Total: 95 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf