On the radiation from common mode currents on cables placed over joined conducting planes commonly used in vehicles
2014 (English)In: IEEE International Symposium on Electromagnetic Compatibility, Institute of Electrical and Electronics Engineers Inc. , 2014, p. 465-468, article id 6997219Conference paper, Published paper (Refereed)
Abstract [en]
Undesired radiation from common mode currents in cables can be reduced by placing the cable on a ground plane. The chassis of a vehicle often consists of several metal sheets, but two adjacent sheets may not be electrically connected along the whole joint. This paper examines the reduced shielding performance due to various types of gaps between two sheets. A solid connection between two sheets is used as a reference. Numerical simulations in the frequency range 30 MHz to 1 GHz is presented for sheets with a total dimension of 1 meter times 0.5 meter.
Place, publisher, year, edition, pages
Institute of Electrical and Electronics Engineers Inc. , 2014. p. 465-468, article id 6997219
Keywords [en]
common mode, radiated emission, shielding, spot welding, Vehicles, Cables, Electromagnetic shielding, Common mode currents, Conducting planes, Frequency ranges, Ground planes, Radiated emissions, Shielding performance, Electromagnetic compatibility
National Category
Engineering and Technology
Identifiers
URN: urn:nbn:se:ri:diva-46473Scopus ID: 2-s2.0-84942579902ISBN: 9784885522871 (print)OAI: oai:DiVA.org:ri-46473DiVA, id: diva2:1460626
Conference
2014 International Symposium on Electromagnetic CompatibiIity, EMC 2014, 12 May 2014 through 16 May 2014
2020-08-242020-08-242020-12-01Bibliographically approved