Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Planning and operation of an integrated energy system in a Swedish building
KTH Royal Institute of Technology, Sweden.
KTH Royal Institute of Technology, Sweden; Mälardalen University, Sweden.
RISE - Research Institutes of Sweden, Safety and Transport, Electronics.ORCID iD: 0000-0002-1226-0788
Tianjin University, China.
Show others and affiliations
2019 (English)In: Energy Conversion and Management, ISSN 0196-8904, E-ISSN 1879-2227, Vol. 199, article id 111920Article in journal (Refereed) Published
Abstract [en]

More flexibility measures are required due to the increasing capacities of variable renewable energies (VRE). In buildings, the integration of energy supplies forms integrated energy systems (IES). IESs can provide flexibility and increase the VRE penetration level. To upgrade a current building energy system into an IES, several energy conversion and storage components are needed. How to decide the component capacities and operate the IES were investigated separately in studies on system planning and system operation. However, a research gap exists that the system configuration from system planning is not validated by actual operation conditions in system operation. Meanwhile, studies on system operation assume that IES configurations are predetermined. This work combines system planning and system operation. The IES configuration is determined by mixed integer linear programming in system planning. Actual operation conditions and forecast errors are considered in system operation. The actual operation profiles are obtained through year-round simulations of different energy management systems. The results indicate that the system configuration from system planning can meet energy demands in system operation. Among different energy management systems, the combination of robust optimization and receding horizon optimization achieves the lowest yearly operation cost. Meanwhile, two scenarios that represent high and low forecast accuracies are studied. Under the high and low forecast accuracy scenarios, the yearly operation costs are about 4% and 6% higher than that obtained from system planning.

Place, publisher, year, edition, pages
Elsevier Ltd , 2019. Vol. 199, article id 111920
Keywords [en]
Building, Integrated energy system, MILP, Planning and operation, Robust optimization
National Category
Natural Sciences
Identifiers
URN: urn:nbn:se:ri:diva-39915DOI: 10.1016/j.enconman.2019.111920Scopus ID: 2-s2.0-85071397120OAI: oai:DiVA.org:ri-39915DiVA, id: diva2:1356523
Note

 Funding details: China Scholarship Council, CSC; Funding text 1: This work has received funding from KKS Future Energy Profile through the project iREST and FREE. Yang Zhang acknowledges the financial support from China Scholarship Council (CSC).

Available from: 2019-10-01 Created: 2019-10-01 Last updated: 2019-10-01Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full textScopus

Authority records

Lundblad, Anders Olof

Search in DiVA

By author/editor
Lundblad, Anders Olof
By organisation
Electronics
In the same journal
Energy Conversion and Management
Natural Sciences

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 67 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf