This paper discusses the Δ-networks and other circuits designed to separate the conducted electromagnetic interference (EMI) into its common mode (CM) and differential mode (DM) components. The input impedances of CM/DM separators must be 50 Ω resistive in the measurement frequency range, and they must be independent of the values of the noise signals and noise source impedances. The conditions for achieving such input impedances are derived. It is shown that many of the proposed separators, including the Δ-network suggested in the International Special Committee on Radio Interference (CISPR) 16-1-2 standard, do not fulfill the input impedance requirement. This leads to unreliable CM and DM measurements and, consequently, to the oversizing of EMI filters and design by trial and error.