Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Cyclic long-term testing of gas turbine burner materials in reducing environments at 700 °c
RISE - Research Institutes of Sweden, Materials and Production, KIMAB.
RISE - Research Institutes of Sweden, Materials and Production, KIMAB.ORCID iD: 0000-0002-2339-9443
2014 (English)In: Materials and corrosion - Werkstoffe und Korrosion, ISSN 0947-5117, E-ISSN 1521-4176, Vol. 65, no 2, p. 169-177Article in journal (Refereed) Published
Abstract [en]

Gas turbines operating under fuel-rich conditions may suffer from material degradation and metal dusting.To evaluate this cyclic exposures have been done at 700 °C during 5000 h in two synthetic environments having a carbon activity of 0.26 and above unity. It was found that the common stainless steel 304L is incapable of withstanding either of the environments, while the stainless steel 253MA performs well because a protective silica layer is formed. The ferritic alumina formers Kanthal APM and Kanthal APMT perform well, together with several commercial chromia forming Ni-base alloys. As a general trend the material degradation is slower in the environment with the higher carbon activity, but pre-oxidised samples of chromia forming alloys did experience sudden and rapid carburisation after scale failure. Also a TBC system failed earlier in this environment, because graphite formation at the top coat/bond coat interface caused spalling of the top coat. Further the MCrAlY bond coat cracked and caused carburisation of the underlying Ni-based substrate. A silicon modified aluminide coating showed good degradation resistance, but stimulated excessive carbon deposition in the environment of high carbon activity. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Place, publisher, year, edition, pages
2014. Vol. 65, no 2, p. 169-177
National Category
Materials Engineering
Identifiers
URN: urn:nbn:se:ri:diva-12796DOI: 10.1002/maco.201307143Scopus ID: 2-s2.0-84900574925OAI: oai:DiVA.org:ri-12796DiVA, id: diva2:972989
Available from: 2016-09-22 Created: 2016-09-22 Last updated: 2023-06-07Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full textScopushttp://onlinelibrary.wiley.com/doi/10.1002/maco.201307143/abstract

Authority records

Norling, Rikard

Search in DiVA

By author/editor
Norling, Rikard
By organisation
KIMAB
In the same journal
Materials and corrosion - Werkstoffe und Korrosion
Materials Engineering

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 40 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf