Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Thermal conductivity of powders used in continuous casting of steel part 2: Powders
RISE, Swerea, Swerea KIMAB.
2015 (English)In: Ironmaking & steelmaking, ISSN 0301-9233, E-ISSN 1743-2812, Vol. 42, no 6, p. 465-470Article in journal (Refereed)
Abstract [en]

Measurements of the thermal conductivity of casting powders are needed to determine the magnitude of the vertical heat flux in the powder bed of a continuous casting mould. The thermal conductivities and thermal diffusivities of four mould powders have been determined using the transient plane source (TPS) and the transient hot wire (THW) methods. The values reported in this investigation are in good agreement with the results of earlier studies which used the THW method. However, the results were significantly different from λeff values obtained in thermal insulation tests. This was attributed to the large contribution to λeff from gaseous conduction which arises from the large temperature gradient across the sample. It was found that the thermal conductivity (λpowd) of the powders had a mean value of 0.125±0.025 W m-1 K-1 for the four powders studied; this value is in good agreement with two other studies; it increased as the temperature increased with a mean temperature coefficient of (dλ/dT59×10-5 W m-1 K-2 for the range 295-1100 K and increased as the bulk density increased (λ295=0.010+1.69×10-4ρbulk W m-1 K-1). © 2015 Institute of Materials, Minerals and Mining.

Place, publisher, year, edition, pages
2015. Vol. 42, no 6, p. 465-470
Keywords [en]
Bulk density, Casting powders, Continuous casting, Thermal conductivity, Thermal diffusivity
National Category
Materials Engineering
Identifiers
URN: urn:nbn:se:ri:diva-12789DOI: 10.1179/1743281214Y.0000000251Scopus ID: 2-s2.0-84940103090OAI: oai:DiVA.org:ri-12789DiVA, id: diva2:972982
Available from: 2016-09-22 Created: 2016-09-22 Last updated: 2017-11-21Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full textScopushttp://www.maneyonline.com/doi/10.1179/1743281214Y.0000000251
By organisation
Swerea KIMAB
In the same journal
Ironmaking & steelmaking
Materials Engineering

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 59 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
v. 2.35.6