Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Flow conditions in the grooves of a Low-Consistency refiner
KTH Royal Institute of Technology, Sweden.
RISE, Innventia.
KTH Royal Institute of Technology, Sweden.
RISE, Innventia.
Show others and affiliations
2012 (English)In: Nordic Pulp & Paper Research Journal, ISSN 0283-2631, E-ISSN 2000-0669, Vol. 27, no 2, p. 173-183Article in journal (Refereed) Published
Abstract [en]

The flow pattern in the grooves plays a major role for the homogeneity of refining as well as for the transfer and loading of fiber flocs in refining position on the bar edges. However, it is an area where very little information is available. In the present study, flow conditions in the grooves in a Low-Consistency (LC) - disc refiner were studied both experimentally and numerically. The experimental study involved high-speed imaging through a 3 cm peephole into a commercial refiner. The Computational Fluid Dynamics (CFD) simulation focused on the flow condition in a radial groove, considering both Newtonian and non-Newtonian flows. Flow conditions for stator and rotor grooves were modeled along the groove at different angular speeds and pressure differences over the refiner. Both the experimental and the modeling results show a dual flow pattern in the grooves; a rotational/spiral movement at the top of the groove and a flow in the direction of the groove at the bottom, which to the authors knowledge has not been reported in literature. The strong vortical motion at the top of the grooves observed both for the rotor and the stator are believed to be important for placing the fibers onto the bar edges and to induce shear forces in such a way that the fibers get treated. Moreover, a large sensitivity to suspension properties in terms of the development of flow pattern was detected.

Place, publisher, year, edition, pages
2012. Vol. 27, no 2, p. 173-183
Keywords [en]
Chemical pulps, Computational Fluid Dynamics, Disc refiner, Fiber suspension, Flow, Hardwood pulps, High-speed imaging, Softwood pulps
National Category
Paper, Pulp and Fiber Technology Fluid Mechanics and Acoustics
Identifiers
URN: urn:nbn:se:ri:diva-9725DOI: 10.3183/NPPRJ-2012-27-02-p173-183Scopus ID: 2-s2.0-84865241072OAI: oai:DiVA.org:ri-9725DiVA, id: diva2:968501
Available from: 2016-09-12 Created: 2016-09-12 Last updated: 2021-01-12Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full textScopus
By organisation
Innventia
In the same journal
Nordic Pulp & Paper Research Journal
Paper, Pulp and Fiber TechnologyFluid Mechanics and Acoustics

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 26 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf