Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Peak Shear Strength of Natural, Unfilled Rock Joints in the Field Based on Data from Drill Cores – A Conceptual Study Based on Large Laboratory Shear Tests
KTH Royal Institute of Technology, Sweden.
KTH Royal Institute of Technology, Sweden.
RISE Research Institutes of Sweden, Material och produktion, Kemi och Tillämpad mekanik.ORCID-id: 0000-0002-4551-5644
SKB Swedish Nuclear Fuel and Waste Management Co, Sweden; KTH Royal Institute of Technology, Sweden.
2022 (engelsk)Inngår i: Rock Mechanics and Rock Engineering, ISSN 0723-2632, E-ISSN 1434-453X, Vol. 55, nr 8, s. 5083-5106Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Significant uncertainties remain regarding the field assessment of the peak shear strength of rock joints. These uncertainties mainly originate from the lack of a verified methodology that would permit prediction of rock joints’ peak shear strength accounting for their surface area, while using information available from smaller samples. This paper investigates a methodology that uses objective observations of the 3D roughness and joint aperture from drill cores to predict the peak shear strength of large natural, unfilled rock joints in the field. The presented methodology has been tested in the laboratory on two natural, unfilled rock joint samples of granite. The joint surface area of the tested samples was of approximately 500 × 300 mm. In this study, the drill cores utilised to predict the peak shear strength of the rock joint samples are simulated based on a subdivision of their digitised surfaces obtained through high-resolution laser scanning. The peak shear strength of the tested samples based on the digitised surfaces of the simulated drill cores is predicted by applying a peak shear strength criterion that accounts for 3D roughness, matedness, and specimen size. The results of the performed analysis and laboratory experiments show that data from the simulated drill cores contain the necessary information to predict the peak shear strength of the tested rock joint samples. The main benefit of this approach is that it may enable the prediction of the peak shear strength in the field under conditions of difficult access.

sted, utgiver, år, opplag, sider
2022. Vol. 55, nr 8, s. 5083-5106
HSV kategori
Identifikatorer
URN: urn:nbn:se:ri:diva-59310DOI: 10.1007/s00603-022-02913-9Scopus ID: 2-s2.0-85131323319OAI: oai:DiVA.org:ri-59310DiVA, id: diva2:1665261
Tilgjengelig fra: 2022-06-07 Laget: 2022-06-07 Sist oppdatert: 2023-05-23bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Andre lenker

Forlagets fulltekstScopus

Person

Larsson, Jörgen

Søk i DiVA

Av forfatter/redaktør
Larsson, Jörgen
Av organisasjonen
I samme tidsskrift
Rock Mechanics and Rock Engineering

Søk utenfor DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric

doi
urn-nbn
Totalt: 292 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
v. 2.43.0