Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Stiffness and strength properties of five paperboards and their moisture dependency
RISE Research Institutes of Sweden, Bioekonomi och hälsa, Massa, papper och förpackningar.ORCID-id: 0000-0001-7356-1093
RISE Research Institutes of Sweden.ORCID-id: 0000-0002-9689-5966
KTH Royal Institute of Technology, Sweden.
2020 (engelsk)Inngår i: TAPPI Journal, ISSN 0734-1415, Vol. 19, nr 2, s. 71-85Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Five commercial multiply folding boxboards made on the same paperboard machine have been analyzed. The paperboards were from the same product series but had different grammage (235, 255, 270, 315, 340 g/m2) and different bending stiffness. The paperboards are normally used to make packages, and because the bending stiffness and grammage varies, the performance of the packages will differ. Finite element simulations can be used to predict these differences, but for this to occur, the stiffness and strength properties need to be determined. For efficient determination of the three-dimensional properties in the machine direction (MD), cross direction (CD), and Z direction (ZD), it is proposed that the paperboard should be characterized using in-plane tension, ZD-tension, shear strength profiles, and two-point bending. The proposed setups have been used to determine stiffness and strength properties at different relative humidity (20,% 50%, 70%, and 90% RH), and the mechanical properties have been evaluated as a function of moisture ratio. There was a linear relation between mechanical properties and moisture ratio for each paperboard. When the data was normalized with respect to the standard climate (50% RH) and plotted as a function of moisture ratio, it was shown that the normalized mechanical properties for all paperboards coincided along one single line and could therefore be expressed as a linear function of moisture ratio and two constants. Consequently, it is possible to obtain the mechanical properties of a paperboard by knowing the structural properties for the preferred level of RH and the mechanical property for the standard climate (50% RH and 23°C).

sted, utgiver, år, opplag, sider
TAPPI Press , 2020. Vol. 19, nr 2, s. 71-85
Emneord [en]
Moisture, Paperboards, Dimensional properties, Finite element simulations, Folding boxboards, Machine directions, Paperboard machines, Stiffness and strength properties, Strength profiles, Two-point bending, Stiffness, Machine Direction, Mechanical Properties, Moisture Content
HSV kategori
Identifikatorer
URN: urn:nbn:se:ri:diva-44794DOI: 10.32964/TJ19.2.71Scopus ID: 2-s2.0-85083756126OAI: oai:DiVA.org:ri-44794DiVA, id: diva2:1436656
Tilgjengelig fra: 2020-06-08 Laget: 2020-06-08 Sist oppdatert: 2023-11-01bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Andre lenker

Forlagets fulltekstScopus

Person

Marin, GustavNygårds, Mikael

Søk i DiVA

Av forfatter/redaktør
Marin, GustavNygårds, Mikael
Av organisasjonen
I samme tidsskrift
TAPPI Journal

Søk utenfor DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric

doi
urn-nbn
Totalt: 86 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
v. 2.43.0