Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Resistance measurements to find high moisture content inclusions adapted for large timber bridge cross-sections
Luleå University of Technology, Sweden.
RISE - Research Institutes of Sweden, Samhällsbyggnad, Byggteknik.
Luleå University of Technology, Sweden.
2017 (Engelska)Ingår i: BioResources, ISSN 1930-2126, E-ISSN 1930-2126, Vol. 12, nr 2, s. 3570-3582Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

One challenge of monitoring and inspecting timber bridges is the difficulty of measuring the moisture content anywhere other than close to the surface. Damage or design mistakes leading to water penetration might not be detected in time, leading to costly repairs. By placing electrodes between the glulam beams, the moisture content through the bridge deck can be measured. Due to the logarithmic decrease of the resistance in wood as a function of electrode length, the model must be calibrated for measurement depth. Two models were created: one for electrode lengths of 50 mm and one for electrode lengths up to 1355 mm. The model for short electrodes differed by no more than 1 percentage points compared with the oven dry specimens. The model for long electrodes differed up to 2 percentage points for lengths up to 905 mm, and over that it could differ up to 4 percentage points.

Ort, förlag, år, upplaga, sidor
North Carolina State University , 2017. Vol. 12, nr 2, s. 3570-3582
Nyckelord [en]
Moisture content, Timber bridge, Timber bridge monitoring, Wood sensors, Bridge components, Damage detection, Electrodes, Moisture, Moisture determination, Timber, Wooden bridges, Dry specimens, Electrode lengths, Glulam beams, High moisture contents, Percentage points, Resistance measurement, Water penetration, Electric measuring bridges
Nationell ämneskategori
Naturvetenskap
Identifikatorer
URN: urn:nbn:se:ri:diva-29795DOI: 10.15376/biores.12.2.3570-3582Scopus ID: 2-s2.0-85018882673OAI: oai:DiVA.org:ri-29795DiVA, id: diva2:1108308
Tillgänglig från: 2017-06-12 Skapad: 2017-06-12 Senast uppdaterad: 2018-02-23Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopushttp://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_12_2_3570_Bjorngrim_Resistance_Measurements_High_Moisture_Bridge/5216
Av organisationen
Byggteknik
I samma tidskrift
BioResources
Naturvetenskap

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 18 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
v. 2.35.8