Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Determination of bridging laws for SMC materials from DENT tests
RISE, Swerea, Swerea SICOMP AB.
Luleå University of Technology.
2003 (Engelska)Ingår i: Composites Science And Technology, ISSN 0266-3538, E-ISSN 1879-1050, Vol. 63, nr 15, s. 2143-2153Artikel i tidskrift (Refereegranskat)
Abstract [en]

A bridging law (or cohesive zone law) approach is employed to evaluate the fracture of double edge notched tensile (DENT) specimen from two SMC materials (Std-SMC and Flex-SMC) with considerable difference in fracture characteristics. Linear- and non-linear FEM was used to separate volumetric body contributions and true crack opening from measured displacements (measured with extensometer) over the cracked region. We found that extrinsic non-linear material response gave a significant contribution to measured displacements. The paper also considers the influence of specimen dimensions on the characteristics of fracture. This is of great importance since stable crack growth is required in order to allow a complete determination of the bridging law in a single experiment. By applying corrections for volumetric displacements in the data reduction scheme we were able to estimate the bridging laws of the two SMCs respectively. They were found to be of decreasing nature and two distinct regions were identified. For small δ, a steeply decreasing part where debonding and fiber fracture are major micro-scale failure mechanism, is identified. At larger δ, a transition to a less steep bridging law response is observed. Pullout friction governs the bridging law at that stage. © 2003 Elsevier Ltd. All rights reserved.

Ort, förlag, år, upplaga, sidor
2003. Vol. 63, nr 15, s. 2143-2153
Nyckelord [en]
A. Short-fibre composites, B. Fracture, B. Fracture toughness, C. Fibre bridging
Nationell ämneskategori
Materialteknik
Identifikatorer
URN: urn:nbn:se:ri:diva-13208DOI: 10.1016/S0266-3538(03)00192-1OAI: oai:DiVA.org:ri-13208DiVA, id: diva2:973404
Tillgänglig från: 2016-09-22 Skapad: 2016-09-22 Senast uppdaterad: 2017-11-21Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltexthttp://www.sciencedirect.com/science/article/pii/S0266353803001921
Av organisationen
Swerea SICOMP AB
I samma tidskrift
Composites Science And Technology
Materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 8 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
v. 2.35.7