Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Dilatometer analysis of the one step quenching and partitioning process in a 1.5%Si steel
RISE - Research Institutes of Sweden (2017-2019), Material och produktion, KIMAB.
RISE - Research Institutes of Sweden (2017-2019), Material och produktion, KIMAB.
2014 (Engelska)Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

A one step quenching and partitioning process was applied to a 0.2%C-2.0%Mn-0.5%Cr- 1.5%Si steel by quenching austenitised samples to several different temperatures below the experimentally determined martensite start temperature of 397 °C and isothermally partitioning them before quenching to room temperature using a quenching deformation dilatometer. These treatments yielded predominantly martensitic microstructures containing 5:6 vol.% to 7:5 vol.% retained austenite, as measured by x-ray diffraction. In each treatment, strong dilation was recorded during isothermal partitioning, with little indication of phase transformation during subsequent cooling to room temperature. This behaviour lends weight to the idea that an isothermal phase transformation occurred during partitioning, and that the final microstructure is a mixture of athermally and isothermally formed constituents. These results also suggest that the final microstructure of this steel is mostly formed before and during partitioning. © (2014) Trans Tech Publications, Switzerland.

Ort, förlag, år, upplaga, sidor
Trans Tech Publications Ltd , 2014. Vol. 783-786, s. 880-885
Serie
Materials Science Forum, ISSN 0255-5476
Nyckelord [en]
Dilatometry, Martensite, Quenching and partitioning, Retained austenite
Nationell ämneskategori
Materialteknik
Identifikatorer
URN: urn:nbn:se:ri:diva-12918DOI: 10.4028/www.scientific.net/MSF.783-786.880Scopus ID: 2-s2.0-84904566895ISBN: 9783038350736 (tryckt)OAI: oai:DiVA.org:ri-12918DiVA, id: diva2:973111
Konferens
8th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2013, Las Vegas, NV, 2 December 2013 through 6 December 2013, 105675
Tillgänglig från: 2016-09-22 Skapad: 2016-09-22 Senast uppdaterad: 2020-07-24Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus
Av organisationen
KIMAB
Materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
isbn
urn-nbn

Altmetricpoäng

doi
isbn
urn-nbn
Totalt: 10 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf