Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Vanadium microalloyed bainitic hot strip steels
RISE, Swerea, Swerea KIMAB AB.
RISE, Swerea, Swerea KIMAB AB.
RISE, Swerea, Swerea KIMAB AB.
RISE, Swerea, Swerea KIMAB AB.
2010 (Engelska)Ingår i: ISIJ International, ISSN 0915-1559, E-ISSN 1347-5460, Vol. 50, nr 5, s. 760-767Artikel i tidskrift (Refereegranskat)
Abstract [en]

The aim of the present study was to investigate the possibilities of reaching yield strengths beyond 600 MPa for low carbon bainitic hot strip steels by vanadium microalloying together with suitable base alloying. The processing conditions and levels of carbon and nitrogen chosen in this laboratory investigation correspond to those of a typical 8 mm hot strip steel containing 0.04mass% carbon and 0.010 mass% nitrogen from electric arc furnace practice processed in conventional or compact strip mills. It was found that a base alloying corresponding to 1.4mass% Mn, 1.0mass% Cr and 0.25mass% Mo is required to form a fully bainitic structure after coiling at 400°C. The decisive factors determining the strength of bainitic hot strip steels are firstly the bainite transformation temperature and secondly the extent to which recovery of the densely dislocated bainitic ferrite can be prevented. The results of this study demonstrate that vanadium microalloying effectively prevents the recovery of the bainitic ferrite and leads to retention of the strength of the virgin bainite after coiling. This is primarily due to retardation of recovery by fine vanadium carbonitrides precipitates on dislocations and only to a lesser extent to true precipitation strengthening. With 0.08 mass% V together with 0.010-0.020 mass% N the yield strength lies in the range of 750-790MPa compared to 680 MPa for a similar reference steel without vanadium. By raising the chromium content to 2 %, yield strengths in the range of 840-880 MPa have been reached. This is attributed to a lowering of the bainite transformation temperature resulting from the higher base alloying. © 2010 ISIJ.

Ort, förlag, år, upplaga, sidor
2010. Vol. 50, nr 5, s. 760-767
Nyckelord [en]
Alloying, Bainite, Cooling, High strength steel, Hot rolling, Mechanical properties, Microstructure
Nationell ämneskategori
Materialteknik
Identifikatorer
URN: urn:nbn:se:ri:diva-12867DOI: 10.2355/isijinternational.50.760Scopus ID: 2-s2.0-77954775753OAI: oai:DiVA.org:ri-12867DiVA, id: diva2:973060
Tillgänglig från: 2016-09-22 Skapad: 2016-09-22 Senast uppdaterad: 2017-11-21Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopushttps://www.jstage.jst.go.jp/article/isijinternational/50/5/50_5_760/_article
Av organisationen
Swerea KIMAB AB
I samma tidskrift
ISIJ International
Materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 34 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf