Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Exposure of 304L and 310S in chlorinating gasification environments
RISE - Research Institutes of Sweden, Material och produktion, KIMAB.
RISE - Research Institutes of Sweden, Material och produktion, KIMAB.
RISE - Research Institutes of Sweden, Material och produktion, KIMAB.ORCID-id: 0000-0002-2339-9443
Jernkontoret, Sweden.
2015 (Engelska)Ingår i: Materials at High Temperature, ISSN 0960-3409, E-ISSN 1878-6413, Vol. 32, nr 1-2, s. 36-43Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

This work examines the difference in behaviour between two austenitic steels, 304L and 310S, in a simulated environment with carbon and oxygen activities typical of the syngas cooler of a steam blown gasifier. The cyclic exposures were performed with and without addition of 500 ppm HCl for a total duration of 960 h. The oxide layers (200-600 nm) were studied using TEM, a focused ion beam microscope with EDX (FIB-EDX), electron back scattered diffraction (EBSD), SEM and X-ray diffraction (XRD). For 304L, a Cr and Ni depleted zone with a ferritic structure was observed below the oxide layer and a thin, manganese rich layer at the metal/oxide interface. For 310S, circular oxide patches were observed on the surface after exposure with HCl. These displayed elevated concentration of Al, Ca and Si, typical of inclusions. Results indicate that the addition of HCl results in a difference in oxide quality and structure but that HCl at the level of this study has little impact on the sound metal thickness.

Ort, förlag, år, upplaga, sidor
2015. Vol. 32, nr 1-2, s. 36-43
Nyckelord [en]
304L, 310S, Austenite, Gasification, High temperature corrosion, Hydrochloric acid, Microstructure, TEM
Nationell ämneskategori
Materialteknik
Identifikatorer
URN: urn:nbn:se:ri:diva-12787DOI: 10.1179/0960340914Z.00000000059Scopus ID: 2-s2.0-84942420340OAI: oai:DiVA.org:ri-12787DiVA, id: diva2:972980
Tillgänglig från: 2016-09-22 Skapad: 2016-09-22 Senast uppdaterad: 2023-06-07Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Person

Norling, Rikard

Sök vidare i DiVA

Av författaren/redaktören
Norling, Rikard
Av organisationen
KIMAB
I samma tidskrift
Materials at High Temperature
Materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 36 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf