Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Off-gas dust in an experimental blast furnace part 1: Characterization of flue dust, sludge and shaft fines
SSAB Oxelösund.
Luleå University of Technology.
RISE, Swerea, Swerea MEFOS AB.
Luleå University of Technology.
2010 (Engelska)Ingår i: ISIJ International, ISSN 0915-1559, E-ISSN 1347-5460, Vol. 50, nr 11, s. 1560-1569Artikel i tidskrift (Refereegranskat)
Abstract [en]

In blast furnace (BF) ironmaking, efforts are made to decrease coke consumption, which can be done by increasing the pulverized coal injection rate (PCR). This will cause changes in ¡n-furnace reduction conditions, burden distribution, demands on raw material strength, etc. In order to maintain stable operation, but also to obtain low amounts of material losses through the off-gas, it is important to understand fines generation and behaviour in the BF Off-gas dust and shaft fines generated in the LKAB Experimental Blast Furnace (EBF) were sampled during operation with olivine pellets and mixtures of acid pellets and sinter as iron-bearing materials. Characterization using XRD, SEM and LOM was focused on fines from iron-bearing materials, coke and slag formers. The results showed that flue dust, mainly <0.5 mm, was mechanically formed and created in the same manner for all investigated samples. Carbon-containing particles dominated in the fractions >0.075 mm and consisted mainly of coke particles from the shaft. Fe-containing particles, as Fe2O 3 from the top of the shaft, formed the major part of flue dust fractions <0.063 mm. Particles from slag formers such as quartzite and limestone were observed in flue dust when slag formers were utilized in the feed. Sludge consisted mainly of chemically formed spherical particles <1 μm precipitated from the ascending gas as the temperature decreased. © 2010 ISIJ.

Ort, förlag, år, upplaga, sidor
2010. Vol. 50, nr 11, s. 1560-1569
Nyckelord [en]
Blast furnace, Coke, Flue dust, Off-gas dust, Pellet, Sinter, Sludge
Nationell ämneskategori
Materialteknik
Identifikatorer
URN: urn:nbn:se:ri:diva-12685DOI: 10.2355/isijinternational.50.1560Scopus ID: 2-s2.0-79551587738OAI: oai:DiVA.org:ri-12685DiVA, id: diva2:972877
Tillgänglig från: 2016-09-22 Skapad: 2016-09-22 Senast uppdaterad: 2017-11-21Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopushttps://www.jstage.jst.go.jp/article/isijinternational/50/11/50_11_1560/_article
Av organisationen
Swerea MEFOS AB
I samma tidskrift
ISIJ International
Materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 32 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf