Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Sulfur recirculation for increased electricity production in Waste-to-Energy plants
Götaverken Miljö AB, Sweden.
RISE., SP – Sveriges Tekniska Forskningsinstitut, SP Energi och Bioekonomi, Förbrännings- och aerosolteknik.
RISE., SP – Sveriges Tekniska Forskningsinstitut. Pöyry SwedPower AB, Sweden.
RISE., SP – Sveriges Tekniska Forskningsinstitut, SP Energi och Bioekonomi, Förbrännings- och aerosolteknik.
Visa övriga samt affilieringar
2014 (Engelska)Ingår i: Waste Management, ISSN 0956-053X, E-ISSN 1879-2456, Vol. 34, nr 1, s. 67-78Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Sulfur recirculation is a new technology for reducing boiler corrosion and dioxin formation. It was demonstrated in full-scale tests at a Waste to Energy plant in Göteborg (Sweden) during nearly two months of operation. Sulfur was recirculated as sulfuric acid from the flue gas cleaning back to the boiler, thus creating a sulfur loop.The new technology was evaluated by extensive measurement campaigns during operation under normal conditions (reference case) and operation with sulfur recirculation. The chlorine content of both fly ash and boiler ash decreased and the sulfur content increased during the sulfur recirculation tests. The deposit growth and the particle concentration decreased with sulfur recirculation and the dioxin concentration (I-TEQ) of the flue gas was reduced by approximately 25%. Sulfuric acid dew point measurements showed that the sulfuric acid dosage did not lead to elevated SO3 concentrations, which may otherwise induce low temperature corrosion.In the sulfur recirculation corrosion probe exposures, the corrosion rate decreased for all tested materials (16Mo3, Sanicro 28 and Inconel 625) and material temperatures (450. °C and 525. °C) compared to the reference exposure. The corrosion rates were reduced by 60-90%. Sulfur recirculation prevented the formation of transition metal chlorides at the metal/oxide interface, formation of chromate and reduced the presence of zinc in the corrosion products. Furthermore, measured corrosion rates at 525. °C with sulfur recirculation in operation were similar or lower compared to those measured at 450. °C material temperature in reference conditions, which corresponds to normal operation at normal steam temperatures. This implies that sulfur recirculation allows for higher steam data and electricity production without increasing corrosion.

Ort, förlag, år, upplaga, sidor
2014. Vol. 34, nr 1, s. 67-78
Nationell ämneskategori
Naturvetenskap
Identifikatorer
URN: urn:nbn:se:ri:diva-6755DOI: 10.1016/j.wasman.2013.09.002Scopus ID: 2-s2.0-84896735987Lokalt ID: 23789OAI: oai:DiVA.org:ri-6755DiVA, id: diva2:964595
Tillgänglig från: 2016-09-08 Skapad: 2016-09-08 Senast uppdaterad: 2023-05-23Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Person

Davidsson, Kent

Sök vidare i DiVA

Av författaren/redaktören
Davidsson, Kent
Av organisationen
Förbrännings- och aerosolteknikSP – Sveriges Tekniska Forskningsinstitut
I samma tidskrift
Waste Management
Naturvetenskap

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 42 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf