Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Drying shrinkage of sawn timber of Norway spruce (Picea abies): Industrial measurements and finite element simulations
RISE., SP – Sveriges Tekniska Forskningsinstitut, SP Sveriges tekniska forskningsinstitut, Trätek.
2011 (Engelska)Ingår i: Wood Material Science & Engineering, ISSN 1748-0272, E-ISSN 1748-0280, Vol. 6, nr 1-2, s. 41-48Artikel i tidskrift (Refereegranskat)
Abstract [en]

Industrial measurements of green and dry cross-section dimensions were performed for 189 Norway spruce (Picea abies) centre-yield boards with dry dimensions 51 × 149 mm. Two, three or four boards were sawn from each log, depending on log size. Different approaches were used for simulations of cross-section shrinkage during drying. An analytical model, an elastic, an elastic– mechanosorptive and an elastic– plastic finite element simulation model were tested. Thickness and width shrinkage and deformation were simulated. Shrinkage results were compared with each other and with the experimental results. All simulation models gave roughly the same degree of agreement with experimental results except for the centre board from the three-board sawing pattern. For the other boards, the analytical model was not generally better or worse than the results from the finite element models. Shrinkage deformations in finite element models that included mechanosorption or plasticity were nearly the same as for the elastic finite element model except for the centre board of the three-board sawing pattern. The mechanosorptive model was the best model for the shrinkage of the centre board of this sawing pattern except for mid-thickness shrinkage. Comparison between the different finite element simulation models of stresses in the centre board revealed large differences.

Ort, förlag, år, upplaga, sidor
2011. Vol. 6, nr 1-2, s. 41-48
Nationell ämneskategori
Naturvetenskap
Identifikatorer
URN: urn:nbn:se:ri:diva-6229Lokalt ID: 12779OAI: oai:DiVA.org:ri-6229DiVA, id: diva2:964065
Tillgänglig från: 2016-09-08 Skapad: 2016-09-08 Senast uppdaterad: 2020-12-01Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Av organisationen
Trätek
I samma tidskrift
Wood Material Science & Engineering
Naturvetenskap

Sök vidare utanför DiVA

GoogleGoogle Scholar

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 26 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf