Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Localized wood surface modification, Part I: Method characterization
Luleå University of Technology, Sweden.
Luleå University of Technology, Sweden.
RISE - Research Institutes of Sweden, Bioekonomi.
Luleå University of Technology, Sweden.
2017 (Engelska)Ingår i: BioResources, ISSN 1930-2126, E-ISSN 1930-2126, Vol. 12, nr 1, s. 283-295Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

This study assesses the potential of an open process for treatment of European Scots pine (Pinus sylvestris) with chemicals that could potentially make the surfaces stronger, more dimensionally stable, or more durable, depending on the treatment solution. The method provides an intermediate solution between full volume impregnation by pressure treatment and superficial surface treatment by dipping. Figuratively speaking, the process creates the equivalent of a layer of coating applied below the wood surfaces rather than above. Two different techniques were compared, namely, heating-and-cooling (H & C) and compression-and-expansion (C & E). Taking into account that commercial suppliers recommend 0.15 to 0.25 L/m2 of coating in sawn wood and 0.1 to 0.15 L/m2 in planed wood surfaces, then this study demonstrates that the H & C method can impregnate an equivalent amount of solution under the surfaces in less than 15 min using treatment temperatures below 150 °C. © 2017 North Carolina State University.

Ort, förlag, år, upplaga, sidor
North Carolina State University , 2017. Vol. 12, nr 1, s. 283-295
Nyckelord [en]
Compression-and-expansion, Heating-and-cooling, Scots pine, Wood surface modification, Coatings, Forestry, Wood, Full volume, Heating and cooling, Open process, Pinus sylvestris, Pressure treatments, Treatment temperature, Wood surfaces, Surface treatment, Processes, Surfaces
Nationell ämneskategori
Materialteknik
Identifikatorer
URN: urn:nbn:se:ri:diva-38107DOI: 10.15376/biores.12.1.283-295Scopus ID: 2-s2.0-85056572675OAI: oai:DiVA.org:ri-38107DiVA, id: diva2:1294789
Anmärkning

Export Date: 4 March 2019; Article; Correspondence Address: Elustondo, D.; Luleå University of Technology, Division of Wood Science and Engineering, Campus Skellefteå, Forskargatan 1, Sweden; email: diego.elustondo@ltu.se

Tillgänglig från: 2019-03-08 Skapad: 2019-03-08 Senast uppdaterad: 2019-03-13Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus
Av organisationen
Bioekonomi
I samma tidskrift
BioResources
Materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 1 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
v. 2.35.7