Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Low frequency sound pressure fields in small rooms in wooden buildings with dense and sparse joist floor spacings
RISE., SP – Sveriges Tekniska Forskningsinstitut, SP Bygg och Mekanik.ORCID-id: 0000-0002-0019-4568
Linnaeus University, Sweden. (Institutionen för maskinteknik (MT))ORCID-id: 0000-0002-4404-5708
RISE., SP – Sveriges Tekniska Forskningsinstitut, SP Bygg och Mekanik.
2015 (Engelska)Ingår i: Proceedings of the INTER-NOISE 2015 - 44th International Congress on Noise Control Engineering: Implementing Noise Control Technology, 2015, Vol. 1, s. 652-663Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Using wood as the main construction material is a potential solution to achieve sustainable buildings. Previous research has shown that frequencies below 50 Hz are of significant importance for the perception of impact sound by residents living in multi-story buildings having light weight wooden frameworks. The standards used for impact sound measurements today are developed for diffuse fields above 50 Hz. For instance due to requirements concerning wall reflections, these methods are not applicable for low frequencies within small rooms. To improve measurement methods, it is important to know the nature of the full sound distribution in small rooms having wooden joist floors. Here, impact sound measurements with microphone arrays are made in two small office rooms having the same dimensions. The rooms represent two extremes in design of joist floors; one with closely spaced wood joists and the other with widely spaced joists. An impact ball is used for excitation the room being measured from the room above. The results show that there are significant variations in the sound pressure, especially in the vertical direction. Here, measurement techniques of impact sound in the low frequency range in small rooms in wooden buildings are evaluated and potential improvements are proposed.

Ort, förlag, år, upplaga, sidor
2015. Vol. 1, s. 652-663
Nyckelord [en]
low frequency, sound pressure, small rooms, wooden buildings, joist floor
Nationell ämneskategori
Husbyggnad
Identifikatorer
URN: urn:nbn:se:ri:diva-36981ISBN: 978-1-5108-1082-2 (tryckt)OAI: oai:DiVA.org:ri-36981DiVA, id: diva2:1275867
Konferens
44th International Congress and Exposition on Noise Control Engineering (INTER-NOISE 2015), August 9-12, 2015, San Francisco, US
Forskningsfinansiär
Interreg Öresund-Kattegat-Skagerrak
Anmärkning

The measurements have been funded by the European Regional Development Fund withinthe Interreg IV A Project, Silent spaces. The analysis of the results was conducted within theProWOOD-program, in this project funded by the Swedish Knowledge foundation, LinnæusUniversity and SP Technical Research Institute of Sweden. The Internoise participation wasfunded by Bo Rydins forksningsstiftelse.

Tillgänglig från: 2019-01-07 Skapad: 2019-01-07 Senast uppdaterad: 2019-07-11Bibliografiskt granskad
Ingår i avhandling
1. Low Frequency Impact Sound in Timber Buildings: Simulations and Measurements
Öppna denna publikation i ny flik eller fönster >>Low Frequency Impact Sound in Timber Buildings: Simulations and Measurements
2016 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

An increased share of construction with timber is one possible way of achieving more sustainable and energy-efficient life cycles of buildings. The main reason is that wood is a renewable material and buildings require a large amount of resources. Timber buildings taller than two storeys were prohibited in Europe until the 1990s due to fire regulations. In 1994, this prohibition was removed in Sweden.

    Some of the early multi-storey timber buildings were associated with more complaints due to impact sound than concrete buildings with the same measured impact sound class rating. Research in later years has shown that the frequency range used for rating has not been sufficiently low in order to include all the sound characteristics that are important for subjective perception of impact sound in light weight timber buildings. The AkuLite project showed that the frequency range has to be extended down to 20 Hz in order to give a good quality of the rating. This low frequency range of interest requires a need for knowledge of the sound field distribution, how to best measure the sound, how to predict the sound transmission levels and how to correlate numerical predictions with measurements.

    Here, the goal is to improve the knowledge and methodology concerning measurements and predictions of low frequency impact sound in light weight timber buildings. Impact sound fields are determined by grid measurements in rooms within timber buildings with different designs of their joist floors. The measurements are used to increase the understanding of impact sound and to benchmark different field measurement methods. By estimating transfer functions, from impact forces to vibrations and then sound pressures in receiving rooms, from vibrational test data, improved possibilities to correlate the experimental results to numerical simulations are achieved. A number of excitation devices are compared experimentally to evaluate different characteristics of the test data achieved. Further, comparisons between a timber based hybrid joist floor and a modern concrete floor are made using FE-models to evaluate how stiffness and surface mass parameters affect the impact sound transfer and the radiation.

    The measurements of sound fields show that light weight timber floors in small rooms tend to have their highest sound levels in the low frequency region, where the modes are well separated, and that the highest levels even can occur below the frequency of the first room mode of the air. In rooms with excitation from the floor above, the highest levels tend to occur at the floor levels and in the floor corners, if the excitation is made in the middle of the room above. Due to nonlinearities, the excitation levels may affect the transfer function in low frequencies which was shown in an experimental study. Surface mass and bending stiffness of floor systems are shown, by simulations, to be important for the amount of sound radiated.

    By applying a transfer function methodology, measuring the excitation forces as well as the responses, improvements of correlation analyses between measurements and simulations can be achieved.

Ort, förlag, år, upplaga, sidor
Växjö: Linnaeus University Dissertations, 2016. s. 100
Nyckelord
Impact sound, Stegljud
Nationell ämneskategori
Annan samhällsbyggnadsteknik Strömningsmekanik och akustik
Identifikatorer
urn:nbn:se:ri:diva-36986 (URN)978-91-88357-46-5 (ISBN)
Presentation
2016-11-30, Sal Tegnér,, Hus H, Linnéuniversitet, Växjö, 10:00 (Engelska)
Opponent
Handledare
Projekt
ProWoodSilent Timber BuildUrban TranquilityBioInnovation FBBB
Tillgänglig från: 2019-07-02 Skapad: 2019-01-07 Senast uppdaterad: 2019-07-02Bibliografiskt granskad

Open Access i DiVA

fulltext(1115 kB)5 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 1115 kBChecksumma SHA-512
85d969cd65d8ac3b8a56652296d35a8a249267227384d6a07470ad51aabfd1a42ef1e52dd115dacdd6c752ec963208b1720d3d55b584b80097a3a69bcd8ad549
Typ fulltextMimetyp application/pdf

Personposter BETA

Olsson, Jörgen

Sök vidare i DiVA

Av författaren/redaktören
Olsson, JörgenLinderholt, Andreas
Av organisationen
SP Bygg och Mekanik
Husbyggnad

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 5 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 12 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
v. 2.35.8