Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Soot reduction in an entrained flow gasifier of biomass by active dispersion of fuel particles
RISE - Research Institutes of Sweden, Bioekonomi, ETC Energy Technology Center. Luleå University of Technology, Sweden.
Luleå University of Technology, Sweden.
Luleå University of Technology, Sweden.
Luleå University of Technology, Sweden.
Visa övriga samt affilieringar
2017 (Engelska)Ingår i: Fuel, ISSN 0016-2361, E-ISSN 1873-7153, s. 111-117Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Soot is an undesired by-product of entrained flow biomass gasification since it has a detrimental effect on operation of the gasifier, e.g. clogging of flow passages and system components and reduction of efficiency. This study investigated how active flow manipulation by adding synthetic jet (i.e. oscillating flow through orifice) in feeding line affects dispersion of fuel particles and soot formation. Pine sawdust was gasified at the conditions similar to pulverized burner flame, where a flat flame of methane-air sub-stoichiometric mixture supported ignition of fuel particles. A synthetic jet flow was supplied by an actuator assembly and was directed perpendicular to a vertical tube leading to the center of the flat flame burner through which pine sawdust with a size range of 63-112. μm were fed into a reactor. Quartz filter sampling and the laser extinction methods were employed to measure total soot yield and soot volume fraction, respectively. The synthetic jet actuator modulated the dispersion of the pine sawdust and broke up particle aggregates in both hot and cold gas flows through generation of large scale vortex structures in the flow. The soot yield significantly reduced from 1.52. wt.% to 0.3. wt.% when synthetic jet actuator was applied. The results indicated that the current method suppressed inception of young soot particles. The method has high potential because soot can be reduced without changing major operation parameters. © 2016.

Ort, förlag, år, upplaga, sidor
2017. s. 111-117
Nyckelord [en]
Biomass, Entrained flow gasification, Particle dispersion, Soot, Vortex rings, Actuators, Dispersions, Dust, Fighter aircraft, Fuel burners, Fuel gages, Fuels, Gasification, Jets, Pulverized fuel, Vortex flow, Active flow manipulation, Entrained flow gasifiers, Large-scale vortex structures, Laser extinction method, Stoichiometric mixtures, Oscillating flow
Nationell ämneskategori
Naturvetenskap
Identifikatorer
URN: urn:nbn:se:ri:diva-27651DOI: 10.1016/j.fuel.2016.09.039Scopus ID: 2-s2.0-84994765423OAI: oai:DiVA.org:ri-27651DiVA, id: diva2:1059493
Tillgänglig från: 2016-12-22 Skapad: 2016-12-21 Senast uppdaterad: 2018-01-22Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus
Av organisationen
ETC Energy Technology Center
I samma tidskrift
Fuel
Naturvetenskap

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 113 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf