This work investigates for the first time how mercury intrusion porosimetry (MIP), NMR-based cryoporometry, and DSC-based thermoporosimetry compare in revealing the porous characteristics of ground calcium carbonate structures compacted over a range of pressures. The comparison is made using the same source samples throughout. MIP, a much-used method in the characterization of porous structures, has the drawback that the high pressure needed to intrude the mercury may either distort the skeletal porous structure of the sample, especially when compressible materials such as cellulose or binders/latex are present, or lead to a reduction in the measured number of large pores due to the shielding by smaller pores. These effects have previously been addressed using bulk modulus corrections and by modeling the structure permeability to account for the potential shielding. Cryoporometry gives detailed information about the pore size distribution of an imbibition saturated structure. Thermoporosimetry is a relatively new candidate in this field, and it yields both pore size distribution and pore volume. Currently it is somewhat limited in the pore size range detectable, but it is relevant to pigmented coatings. Its potential is identified for capturing the pores involved in the progress of imbibition before saturation is reached.