Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
3D-shapeable thermoplastic paper materials
KTH Royal Institute of Technology, Sweden.
RISE., Innventia.
BillerudKorsnäs AB, Sweden.
KTH Royal Institute of Technology, Sweden.
2013 (engelsk)Inngår i: Nordic Pulp and Paper Research Journal, ISSN 0283-2631 , Vol. 28, nr 4, s. 602-610Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

The purpose of this work was to investigate to what extent it is possible to improve the thermoplastic properties of paper materials so that 3Dshapeable paper products can be manufactured. For that purpose, the addition of various chemical adjuvants, known to improve both tensile strength index and strain at break, was investigated. Adding polylactide latex was found to significantly improve both the tensile strength properties and strain at break of paper materials. To enhance their strainability, the paper sheets were cured at an elevated temperature of 150°C. The improved strainability after curing is hypothesized to relate to the spreading of the polylactide latex (minimum filmforming temperature of 90°C) on the fibre surfaces, improving the relative bonded area. Both the tensile strength index and strain at break improved significantly with no densification of the paper sheets. A second aim was to make double-curved board structures in a hydroforming equipment, using the sheets treated with polylactide latex under various conditions. Double-curved sheets with a nominal strain at break of over 20% could be formed by adding 20% polylactide latex. Hydroforming had to be done at temperatures exceeding the minimum film-forming temperature of the polylactide latex to significantly improve the strain at break during the forming operation.

sted, utgiver, år, opplag, sider
2013. Vol. 28, nr 4, s. 602-610
Emneord [en]
Bleached kraft pulp, Deep-drawing, Hydroforming, Polylactide latex, Strain at break, Tensile index, Thermoplastic board, Three-dimensional packaging materials
HSV kategori
Identifikatorer
URN: urn:nbn:se:ri:diva-9767DOI: 10.3183/npprj-2013-28-04-p602-610Scopus ID: 2-s2.0-84891841593OAI: oai:DiVA.org:ri-9767DiVA, id: diva2:968549
Tilgjengelig fra: 2016-09-12 Laget: 2016-09-12 Sist oppdatert: 2020-12-01bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Andre lenker

Forlagets fulltekstScopus
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric

doi
urn-nbn
Totalt: 56 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
v. 2.45.0