Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Damage to coated plastics pipes from trenchless laying techniques
RISE., SP – Sveriges Tekniska Forskningsinstitut, SP Sveriges tekniska forskningsinstitut, SP – Sveriges Tekniska Forskningsinstitut / Göteborg (BMg).
RISE., SP – Sveriges Tekniska Forskningsinstitut, SP Sveriges tekniska forskningsinstitut, SP – Sveriges Tekniska Forskningsinstitut / Göteborg (BMg).
2006 (engelsk)Rapport (Fagfellevurdert)
Abstract [en]

This project aims at evaluating an external coating on plastics pipes; and its protective function against scratches and scoring damage from trenchless laying techniques. PE100 pressure pipes with four different coatings were tested in horizontal drilling and pipe bursting field trials. During the tests, the lengthwise and cross-sectional deformations of the pipe were measured along with the traction force. The pipes’ surfaces were examined with respect to scratches, and the depth of the most prominent ones were determined. Of the two laying techniques, pipe bursting was the one that caused the deepest scratches. Horizontal drilling was not significantly worse than ordinary handling during transport and preparation with respect to scratch depth. Dragging of the pipe above ground on asphalt surfaces caused severe damage to the pipe wall. The deepest scratches were seen on two pipe selections with soft coatings. Due to their thickness, however, these coatings were not penetrated and thus successfully protected the main pipe wall. The hardest coating tested, made of polypropylene, was also the thinnest one, and it was penetrated at one location during the pipe bursting test. The traction force on the pipe was significantly higher during horizontal drilling than during pipe bursting. On the other hand, ovalisation of the pipe’s cross-section was greater during pipe bursting.

sted, utgiver, år, opplag, sider
2006.
Serie
SP Rapport, ISSN 0284-5172 ; 2006:49
HSV kategori
Identifikatorer
URN: urn:nbn:se:ri:diva-4743Lokal ID: 7243ISBN: 91-85533-37-8 (tryckt)OAI: oai:DiVA.org:ri-4743DiVA, id: diva2:962381
Tilgjengelig fra: 2016-09-07 Laget: 2016-09-07 Sist oppdatert: 2020-12-01bibliografisk kontrollert

Open Access i DiVA

fulltekst(1640 kB)168 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 1640 kBChecksum SHA-512
1d2ea3d00288c9c136abcb1e184de2d9a9cee9d86b0af4fdee1a3bb3eebe538ae4d93e0727e76030a5a3af71d47d11591f721712cdff9b377c3a29c4687028c3
Type fulltextMimetype application/pdf

Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 174 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

isbn
urn-nbn

Altmetric

isbn
urn-nbn
Totalt: 79 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
v. 2.41.0