Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Experimental and finite element simulation study of capsule-free hot isostatic pressing of sintered gears
Chalmers University of Technology, Sweden.
KTH Royal Institute of Technology, Sweden.
Höganäs AB, Sweden.
Chalmers University of Technology, Sweden.
Vise andre og tillknytning
2018 (engelsk)Inngår i: The International Journal of Advanced Manufacturing Technology, ISSN 0268-3768, E-ISSN 1433-3015, Vol. 99, nr 5-8, s. 1725-1733Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

A novel approach to reach full density in powder metallurgy (PM) components is demonstrated in this work. Water-atomised Mo-prealloyed steel powder is utilised for manufacturing cylindrical and gear samples through double pressing and double sintering (DPDS) process route. The effect of sample geometry and powder size fraction on densification is investigated and it is found that the DPDS route enables a density level of > 95% which is sufficient to eliminate the surface open pores. Reaching such high density is necessary, in order to perform capsule-free hot isostatic pressing (HIP). After HIP, full densification is achieved for the cylindrical samples and only near full density is realised for the gears resulting in neutral zone formation due to the density gradient. In order to predict the densification behaviour during the compaction, FEM simulations considering the gear geometry are performed for both the pressing stages and HIP. The simulation predicted a similar densification behaviour with the formation of the neutral zone. The proposed DPDS route with capsule-free HIP in combination with FEM simulation is demonstrated as a potential route for manufacturing full-density PM steel components, e.g. gears, suitable for high-performance applications.

sted, utgiver, år, opplag, sider
2018. Vol. 99, nr 5-8, s. 1725-1733
Emneord [en]
PM steels, Gears, Pressing, Capsule-free HIP, Density, Finite element simulations
HSV kategori
Identifikatorer
URN: urn:nbn:se:ri:diva-35151DOI: 10.1007/s00170-018-2623-4Scopus ID: 2-s2.0-85052611724OAI: oai:DiVA.org:ri-35151DiVA, id: diva2:1247204
Tilgjengelig fra: 2018-09-11 Laget: 2018-09-11 Sist oppdatert: 2019-01-08bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Andre lenker

Forlagets fulltekstScopushttps://doi.org/10.1007/s00170-018-2623-4
Av organisasjonen
I samme tidsskrift
The International Journal of Advanced Manufacturing Technology

Søk utenfor DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric

doi
urn-nbn
Totalt: 21 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
v. 2.35.10