Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Using the SPH Method to Easier Predict Wear in Machining
RISE - Research Institutes of Sweden, Swerea, Swerea KIMAB AB. KTH Royal Institute of Technology, Sweden.
RISE - Research Institutes of Sweden, Swerea, Swerea KIMAB AB.
RISE - Research Institutes of Sweden, Swerea, Swerea KIMAB AB. KTH Royal Institute of Technology, Sweden.
2017 (engelsk)Inngår i: Procedia CIRP, 2017, s. 317-322Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

Usage of FE-models to predict wear is a tricky business. There is the question of material behaviour that gives the loading on the tool. There is the question of wear models and parameters that determine the amount of wear that can be expected for each combination of loadings. And there is the question of FE-specific features like re-mesh or failure modelling in the chip separation zone. The main objective with this paper is to better characterise the wear in numerical simulations by using the SPH modelling technique and determine wear model with wear parameters suitable for such simulations. The SPH(Smoothed Particle Hydrodynamics) modelling technique is used because of its capability to capture large deformations in a consistent way. Wear studies are used as a base for the choice of appropriate simulation based wear model. Two materials with seemingly similar elastic-plastic material behaviour but with distinct different wear behaviour will be compared. Wear can be assumed to derive from the loading on the tool in combination with the surface to surface slip. It is known that a change of failure model and parameter together with friction values used in a simulation yields a change the shape of the chip. And the shape of the chip determines the loading on the tool. Moreover, the wear model that is used in the analysis will capture the the effect of the loading and the combination of the tool-work piece material. The tool-work piece contact is characterised by shear zone where no slip is present followed by an unloading sequence where slip is present with subsequent visible wear. loading patterns from the simulations were consistent with the observed wear and consequently the SPH method was determined as suitable for the task. © 2017 The Authors.

sted, utgiver, år, opplag, sider
2017. s. 317-322
Emneord [en]
Cutting, Hardening, Machining, Plastic, Simulation, SPH, Turning, Wear, Elastoplasticity, Machining centers, Plastics, Unloading, Wear of materials, Elastic-plastic Material, Failure modelling, Loading patterns, Material behaviour, Modelling techniques, Smoothed particle hydrodynamics, Unloading sequence, Hydrodynamics
HSV kategori
Identifikatorer
URN: urn:nbn:se:ri:diva-33140DOI: 10.1016/j.procir.2017.03.234Scopus ID: 2-s2.0-85029752171OAI: oai:DiVA.org:ri-33140DiVA, id: diva2:1179083
Konferanse
16th CIRP Conference on Modelling of Machining Operations, CIRP CMMO 2017, 15 June 2017 through 16 June 2017
Merknad

Funding details: Wild Steelhead Coalition; Funding details: RFSR-CT-2014-00020, European Social FundFunding details: Royal Melbourne Institute of Technology; Funding details: British Sedimentological Research Group; Funding details: Minnesota Department of Health; Funding details: Kungliga Tekniska Högskolan

Tilgjengelig fra: 2018-01-31 Laget: 2018-01-31 Sist oppdatert: 2018-01-31bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Andre lenker

Forlagets fulltekstScopus
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric

doi
urn-nbn
Totalt: 4 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
v. 2.35.7