Change search
Link to record
Permanent link

Direct link
Publications (10 of 26) Show all publications
Edberg, J., Boda, U., Mulla, Y., Brooke, R., Pantzare, S., Strandberg, J., . . . Armgarth, A. (2023). A Paper‐Based Triboelectric Touch Interface: Toward Fully Green and Recyclable Internet of Things. Advanced Sensor Research, 2(1), Article ID 2200015.
Open this publication in new window or tab >>A Paper‐Based Triboelectric Touch Interface: Toward Fully Green and Recyclable Internet of Things
Show others...
2023 (English)In: Advanced Sensor Research, Vol. 2, no 1, article id 2200015Article in journal (Refereed) Published
Abstract [en]

The transition to a sustainable society is driving the development of green electronic solutions designed to have a minimal environmental impact. One promising route to achieve this goal is to construct electronics from biobased materials like cellulose, which is carbon neutral, non‐toxic, and recyclable. This is especially true for internet‐of‐things devices, which are rapidly growing in number and are becoming embedded in every aspect of our lives. Here, paper‐based sensor circuits are demonstrated, which use triboelectric pressure sensors to help elderly people communicate with the digital world using an interface in the form of an electronic “book”, which is more intuitive to them. The sensors are manufactured by screen printing onto flexible paper substrates, using in‐house developed cellulose‐based inks with non‐hazardous solvents. The triboelectric sensor signal, generated by the contact between a finger and chemically modified cellulose, can reach several volts, which can be registered by a portable microcontroller card and transmitted by Bluetooth to any device with an internet connection. Apart from the microcontroller (which can be easily removed), the whole system can be recycled at the end of life. A triboelectric touch interface, manufactured using printed electronics on flexible paper substrates, using cellulose‐based functional inks is demonstrated. These metal‐free green electronics circuits are implemented in an “electronic book” demonstrator, equipped with wireless communication that can control remote devices, as a step toward sustainable and recyclable internet‐of‐things devices.

National Category
Electrical Engineering, Electronic Engineering, Information Engineering
Identifiers
urn:nbn:se:ri:diva-63313 (URN)10.1002/adsr.202200015 (DOI)
Note

The authors would like to acknowledge funding from Vinnova through theD igital Cellulose Competence Center (DCC), Diary number 2016–05193, the Swedish Foundation for Strategic Research (Smart Intra-body network; grant RIT15-0119), and the Norrköping municipality fund for research and development (Accessibility and remembering – storytelling and innovative media use in elderly care homes, 2020. Grant: KS 2020/0345). The work was also supported by Treesearch.se. The authors thank Patrik Isacsson and co-workers at Ahlstrom Munksjö for providing the paper substrates and for valuable know-how as part of the collaboration within DCC, as well as Erik Gabrielsson, Daniel Simon, Elisabet Cedersund, and Lars Herlogsson for their involvement in the work on the original Mediabook platform.

Available from: 2023-01-30 Created: 2023-01-30 Last updated: 2024-04-09Bibliographically approved
Brooke, R., Freitag, K., Petsagkourakis, I., Nilsson, M. & Andersson Ersman, P. (2023). All-Printed Electrochromic Stickers. Macromolecular materials and engineering, 308(9), Article ID 2300044.
Open this publication in new window or tab >>All-Printed Electrochromic Stickers
Show others...
2023 (English)In: Macromolecular materials and engineering, ISSN 1438-7492, E-ISSN 1439-2054, Vol. 308, no 9, article id 2300044Article in journal (Refereed) Published
Abstract [en]

Displays are one of the most mature technologies in the field of printed electronics. Their ability to be manufactured in large quantities and at low cost has led to their recent uptake into the consumer market. Within this article this technology is extended to electrochromic display stickers. This is achieved using a recent reverse display architecture screen printed on textile and paper sticker substrates. The electrochromic stickers are comparable to plastic control substrates and show little performance difference even when adhered to curved surfaces. The electrochromic display technology is extended to sticker labels for authentication applications by patterning either the dielectric or the graphical layer. A proof-of-concept prototype emulating a wax seal on an envelope is presented to show that other colors can be implemented in this technology. © 2023 The Authors.

Place, publisher, year, edition, pages
John Wiley and Sons Inc, 2023
Keywords
electrochromic displays, electrochromic stickers, electrochromism, PEDOT:PSS, screen printing, Conducting polymers, Electrochromic devices, Substrates, All-printed, Consumer market, Electrochromic sticker, Electrochromics, Low-costs, PEDOT/PSS, Performance, Printed electronics, Screen-printed
National Category
Natural Sciences
Identifiers
urn:nbn:se:ri:diva-64726 (URN)10.1002/mame.202300044 (DOI)2-s2.0-85153338202 (Scopus ID)
Note

Correspondence Address: Andersson Ersman, P.; Digital Systems, Sweden; email: peter.andersson.ersman@ri.se; Funding details: Stiftelsen för Strategisk Forskning, SSF; Funding text 1: This project was financially supported by the Swedish Foundation for Strategic Research.

Available from: 2023-05-15 Created: 2023-05-15 Last updated: 2024-04-09Bibliographically approved
Brooke, R., Petsagkourakis, I., Majee, S., Olsson, O., Dahlin, A. & Andersson Ersman, P. (2023). All-Printed Multilayers and Blends of Poly(dioxythiophene) Derivatives Patterned into Flexible Electrochromic Displays. Macromolecular materials and engineering, 308(2), Article ID 2200453.
Open this publication in new window or tab >>All-Printed Multilayers and Blends of Poly(dioxythiophene) Derivatives Patterned into Flexible Electrochromic Displays
Show others...
2023 (English)In: Macromolecular materials and engineering, ISSN 1438-7492, E-ISSN 1439-2054, Vol. 308, no 2, article id 2200453Article in journal (Refereed) Published
Abstract [en]

Low-cost, flexible and thin display technology is becoming an interesting field of research as it can accompany the wide range of sensors being developed. Here, the synthesis of poly(dimethylpropylene-dioxythiophene) (PProDOT-Me2) by combining vapor phase polymerization and screen printing is presented. A multilayer architecture using poly(3,4-ethylenedioxythiophene) (PEDOT) and PProDOT-Me2 to allow for electrochromic switching of PProDOT-Me2, thereby eliminating the need for a supporting transparent conductive (metal oxide) layer is introduced. Furthermore, the technology is adapted to a blended architecture, which removes the additional processing steps and results in improved color contrast (∆E* > 25). This blend architecture is extended to other conductive polymers, such as PEDOT and polypyrrole (PPy), to highlight the ability of the technique to adjust the color of all-printed electrochromic displays. As a result, a green color is obtained when combining the blue and yellow states of PEDOT and PPy, respectively. This technology has the potential to pave the way for all-printed multicolored electrochromic displays for further utilization in printed electronic systems in various Internet of Things applications. © 2022 The Authors. 

Place, publisher, year, edition, pages
John Wiley and Sons Inc, 2023
Keywords
electrochromic displays, PEDOT, PProDOT-Me2, screen printing, vapor phase polymerization, Color, Colorimetry, Electrochromic devices, Electrochromism, Flexible displays, Metals, Multilayers, Polymerization, Polypyrroles, All-printed, Display technologies, Electrochromic switching, Ethylenedioxythiophenes, Low-costs, Multi-layer architectures, Poly(3, 4-ethylenedioxythiophene), Architecture
National Category
Materials Chemistry
Identifiers
urn:nbn:se:ri:diva-61229 (URN)10.1002/mame.202200453 (DOI)2-s2.0-85141354656 (Scopus ID)
Note

Funding details: Stiftelsen för Strategisk Forskning, SSF; Funding text 1: This project was financially supported by the Swedish Foundation for Strategic Research.

Available from: 2022-12-02 Created: 2022-12-02 Last updated: 2024-01-17Bibliographically approved
Andersson Ersman, P., Freitag, K., Nilsson, M., Åhlin, J., Brooke, R., Nordgren, N., . . . Beni, V. (2023). Electrochromic Displays Screen Printed on Transparent Nanocellulose-Based Substrates. Advanced Photonics Research, Article ID 2200012.
Open this publication in new window or tab >>Electrochromic Displays Screen Printed on Transparent Nanocellulose-Based Substrates
Show others...
2023 (English)In: Advanced Photonics Research, ISSN 2699-9293, article id 2200012Article in journal (Refereed) Published
Abstract [en]

Manufacturing of electronic devices via printing techniques is often considered to be an environmentally friendly approach, partially due to the efficient utilization of materials. Traditionally, printed electronic components (e.g., sensors, transistors, and displays) are relying on flexible substrates based on plastic materials; this is especially true in electronic display applications where, most of the times, a transparent carrier is required in order to enable presentation of the display content. However, plastic-based substrates are often ruled out in end user scenarios striving toward sustainability. Paper substrates based on ordinary cellulose fibers can potentially replace plastic substrates, but the opaqueness limits the range of applications where they can be used. Herein, electrochromic displays that are manufactured, via screen printing, directly on state-of-the-art fully transparent substrates based on nanocellulose are presented. Several different nanocellulose-based substrates, based on either nanofibrillated or nanocrystalline cellulose, are manufactured and evaluated as substrates for the manufacturing of electrochromic displays, and the optical and electrical switching performances of the resulting display devices are reported and compared. The reported devices do not require the use of metals and/or transparent conductive oxides, thereby providing a sustainable all-printed electrochromic display technology.

Place, publisher, year, edition, pages
John Wiley & Sons, Ltd, 2023
Keywords
electrochromic displays, nanocellulose, organic electronics, PEDOT:PSS, printed electronics
National Category
Other Electrical Engineering, Electronic Engineering, Information Engineering
Identifiers
urn:nbn:se:ri:diva-59998 (URN)10.1002/adpr.202200012 (DOI)
Note

This project has received funding from the European Union's Horizon 2020 research and innovation program under the grant agreement no. 761000—GREENSENSE. Additional financial support was provided by the Swedish Foundation for Strategic Research (grant agreement no. EM16-0002).

Available from: 2022-08-26 Created: 2022-08-26 Last updated: 2023-12-06Bibliographically approved
Brooke, R., Lay, M., Jain, K., Francon, H., Say, M., Belaineh Yilma, D., . . . Berggren, M. (2023). Nanocellulose and PEDOT:PSS composites and their applications. Polymer Reviews (2), 437
Open this publication in new window or tab >>Nanocellulose and PEDOT:PSS composites and their applications
Show others...
2023 (English)In: Polymer Reviews, ISSN 1558-3724, no 2, p. 437-Article in journal (Refereed) Published
Abstract [en]

The need for achieving sustainable technologies has encouraged research on renewable and biodegradable materials for novel products that are clean, green, and environmentally friendly. Nanocellulose (NC) has many attractive properties such as high mechanical strength and flexibility, large specific surface area, in addition to possessing good wet stability and resistance to tough chemical environments. NC has also been shown to easily integrate with other materials to form composites. By combining it with conductive and electroactive materials, many of the advantageous properties of NC can be transferred to the resulting composites. Conductive polymers, in particular poly(3,4-ethylenedioxythiophene:poly(styrene sulfonate) (PEDOT:PSS), have been successfully combined with cellulose derivatives where suspensions of NC particles and colloids of PEDOT:PSS are made to interact at a molecular level. Alternatively, different polymerization techniques have been used to coat the cellulose fibrils. When processed in liquid form, the resulting mixture can be used as a conductive ink. This review outlines the preparation of NC/PEDOT:PSS composites and their fabrication in the form of electronic nanopapers, filaments, and conductive aerogels. We also discuss the molecular interaction between NC and PEDOT:PSS and the factors that affect the bonding properties. Finally, we address their potential applications in energy storage and harvesting, sensors, actuators, and bioelectronics. © 2022 The Author(s). 

Place, publisher, year, edition, pages
Taylor and Francis Ltd., 2023
Keywords
cellulose, composites, conductive polymers, nanocellulose, PEDOT, Aerogels, Chemical bonds, Chemical stability, Sols, Styrene, Suspensions (fluids), Biodegradable material, Conductive Polymer, Ethylenedioxythiophenes, High mechanical strength, Nano-cellulose, Poly(styrene sulfonate), Property, Renewable materials, Sustainable technology, Conducting polymers
National Category
Chemical Sciences
Identifiers
urn:nbn:se:ri:diva-60200 (URN)10.1080/15583724.2022.2106491 (DOI)2-s2.0-85136111219 (Scopus ID)
Note

Funding details: Dimbleby Cancer Care, DCC, 2016–05193; Funding details: Stiftelsen för Strategisk Forskning, SSF, GMT14-0058; Funding details: Wallenberg Wood Science Center, WWSC; Funding text 1: The authors would like to acknowledge funding from Vinnova for the Digital Cellulose Competence Center (DCC), Diary number 2016–05193, the Swedish Foundation for Strategic Research (GMT14-0058) and the Wallenberg Wood Science Centre.

Available from: 2022-09-22 Created: 2022-09-22 Last updated: 2023-06-30Bibliographically approved
Brooke, R., Edberg, J., Petsagkourakis, I., Freitag, K., Mulla, M. Y., Nilsson, M., . . . Andersson Ersman, P. (2023). Paper Electronics Utilizing Screen Printing and Vapor Phase Polymerization. Advanced Sustainable Systems, 7(7), Article ID 2300058.
Open this publication in new window or tab >>Paper Electronics Utilizing Screen Printing and Vapor Phase Polymerization
Show others...
2023 (English)In: Advanced Sustainable Systems, ISSN 2366-7486, Vol. 7, no 7, article id 2300058Article in journal (Refereed) Published
Abstract [en]

The rise of paper electronics has been accelerated due to the public push for sustainability. Electronic waste can potentially be avoided if certain materials in electronic components can be substituted for greener alternatives such as paper. Within this report, it is demonstrated that conductive polymers poly(3,4-ethylenedoxythiophene) (PEDOT), polypyrrole, and polythiophene, can be synthesized by screen printing combined with vapor phase polymerization on paper substrates and further incorporated into functional electronic components. High patterning resolution (100 µm) is achieved for all conductive polymers, with PEDOT showing impressive sheet resistance values. PEDOT is incorporated as conductive circuitry and as the active material in all-printed electrochromic displays. The conductive polymer circuits allow for functional light emitting diodes, while the electrochromic displays are comparable to commercial displays utilizing PEDOT on plastic substrates. 

Place, publisher, year, edition, pages
John Wiley and Sons Inc, 2023
Keywords
conductive polymers, paper electronics, PEDOT, printed electronics, vapor phase polymerization, Electrochromism, Network components, Polypyrroles, Screen printing, Substrates, Conductive Polymer, Electrochromic displays, Electronic component, Electronics wastes, Paper substrate, Synthesised, Polymerization
National Category
Electrical Engineering, Electronic Engineering, Information Engineering
Identifiers
urn:nbn:se:ri:diva-64953 (URN)10.1002/adsu.202300058 (DOI)2-s2.0-85159261879 (Scopus ID)
Note

Correspondence Address: Edberg, J.; RISE Research Institutes of Sweden, Sweden; email: jesper.edberg@ri.se; Funding details: 2016‐05193; Funding details: Stiftelsen för Strategisk Forskning, SSF, EM16‐0002; Funding details: Horizon 2020, 101008701;  This work was financially supported by the Swedish Foundation for Strategic Research (Diary number EM16‐0002), Vinnova for the Digital Cellulose Center (Diary number 2016‐05193) and the European Union's Horizon 2020 research and innovation program under grant agreement 101008701 (EMERGE).

Available from: 2023-06-09 Created: 2023-06-09 Last updated: 2024-06-10Bibliographically approved
Andersson Ersman, P., Boda, U., Petsagkourakis, I., Åhlin, J., Posset, U., Schott, M. & Brooke, R. (2023). Reflective and Complementary Transmissive All-Printed Electrochromic Displays Based on Prussian Blue. Advanced Engineering Materials, 25(6), Article ID 2201299.
Open this publication in new window or tab >>Reflective and Complementary Transmissive All-Printed Electrochromic Displays Based on Prussian Blue
Show others...
2023 (English)In: Advanced Engineering Materials, ISSN 1438-1656, E-ISSN 1527-2648, Vol. 25, no 6, article id 2201299Article in journal (Refereed) Published
Abstract [en]

By combining the electrochromic (EC) properties of Prussian blue (PB) and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS), complementary EC displays manufactured by slot-die coating and screen printing on flexible plastic substrates are reported. Various display designs have been realized, resulting in displays operating in either transmissive or reflective mode. For the transmission mode displays, the color contrast is enhanced by the complementary switching of the two EC electrodes PB and PEDOT:PSS. Both electrodes are either exhibiting a concurrent colorless or blue appearance. For the displays operating in reflection mode, a white opaque electrolyte is used in conjunction with the EC properties of PB, resulting in a display device switching between a fully white state and a blue-colored state. The developments of the different device architectures, that either operate in reflection or transmission mode, demonstrate a scalable manufacturing approach of all-printed EC displays that may be used in a large variety of Internet of Things applications. © 2022 The Authors. 

Place, publisher, year, edition, pages
John Wiley and Sons Inc, 2023
Keywords
electrochromic displays, flexible electronics, PEDOT:PSS, printed electronics, Prussian blue, Conducting polymers, Electrochromic devices, Electrochromism, Electrodes, Electrolytes, Flexible displays, Substrates, Transmissions, (PB) and poly(3, 4-ethylenedioxythiophene):polystyrene sulphonate, All-printed, Electrochromic properties, Ethylenedioxythiophenes, Poly(styrene sulfonate), Reflection modes, Transmission mode, Screen printing
National Category
Materials Chemistry
Identifiers
urn:nbn:se:ri:diva-61424 (URN)10.1002/adem.202201299 (DOI)2-s2.0-85142006905 (Scopus ID)
Note

 Funding details: Seventh Framework Programme, FP7, 604204; Funding details: Stiftelsen för Strategisk Forskning, SSF, EM16‐0002; Funding details: Seventh Framework Programme, FP7; Funding text 1: This project was financially supported by the Swedish Foundation for Strategic Research (grant agreement no. EM16‐0002) and the European Union's Seventh Framework Program (FP7) under grant agreement no. 604204 (EELICON). The authors thank COC Ltd. (Centrum Organicke Chemie s.r.o., Rybitvi), Czech Republic, for the supply of some of the raw materials.

Available from: 2022-12-08 Created: 2022-12-08 Last updated: 2023-10-31Bibliographically approved
Freitag, K., Brooke, R., Nilsson, M., Åhlin, J., Beni, V. & Andersson Ersman, P. (2023). Screen Printed Reflective Electrochromic Displays for Paper and Other Opaque Substrates. ACS Applied Optical Materials, 1(2), 578-586
Open this publication in new window or tab >>Screen Printed Reflective Electrochromic Displays for Paper and Other Opaque Substrates
Show others...
2023 (English)In: ACS Applied Optical Materials, ISSN 2771-9855, Vol. 1, no 2, p. 578-586Article in journal (Refereed) Published
Abstract [en]

Paper electronics is a viable alternative to traditional electronics, leading to more sustainable electronics. Many challenges still require solutions before paper electronics become mainstream. Here, we present a solution to enable the manufacturing of reflective all-printed organic electrochromic displays (OECDs) on paper substrates; devices that are usually printed on transparent substrates, for example, plastics. In order to operate on opaque paper substrates, an architecture for reversely printed OECDs (rOECDs) is developed. In this architecture, the electrochromic layer is printed as the last functional layer and can therefore be viewed from the print side. Square shaped 1 cm2 rOECDs are successfully screen printed on paper, with a high manufacturing yield exceeding 99%, switching times <3 s and high color contrast (ΔE* > 27). Approximately 60% of the color is retained after 15 min in open-circuit mode. Compared to the conventional screen printed OECD architectures, the rOECDs recover approximately three times faster from storage in a dry environment, which is particularly important in systems where storage in low humidity atmosphere is required, for example, in many biosensing applications. Finally, a more complex rOECD with 9 individually addressable segments is successfully screen printed and demonstrated.

National Category
Engineering and Technology
Identifiers
urn:nbn:se:ri:diva-64117 (URN)10.1021/acsaom.2c00140 (DOI)
Available from: 2023-03-01 Created: 2023-03-01 Last updated: 2023-06-08Bibliographically approved
Brooke, R., Wijeratne, K., Hübscher, K., Belaineh Yilma, D. & Andersson Ersman, P. (2022). Combining Vapor Phase Polymerization and Screen Printing for Printed Electronics on Flexible Substrates. Advanced Materials Technologies, 7(7), Article ID 2101665.
Open this publication in new window or tab >>Combining Vapor Phase Polymerization and Screen Printing for Printed Electronics on Flexible Substrates
Show others...
2022 (English)In: Advanced Materials Technologies, E-ISSN 2365-709X, Vol. 7, no 7, article id 2101665Article in journal (Refereed) Published
Abstract [en]

Large area manufacturing of printed electronic components on ~A4-sized substrates is demonstrated by the combination of screen printing and vapor phase polymerization (VPP) into poly(3,4-ethylenedioxythiophene) (PEDOT). The oxidant layer required for the polymerization process is screen printed, and the resulting conductive polymer patterns are manufactured at high resolution (100 µm). Successful processing of several common oxidant species is demonstrated, and the thickness can be adjusted by altering the polymerization time. By comparing the polymer films of this work to a commercial PEDOT:PSS (PEDOT doped with poly(styrene sulfonate)) screen printing ink shows improved surface roughness (26 vs 69 nm), higher conductivity (500 vs 100 S cm–1) and better resolution (100 vs 200 µm). Organic electrochemical transistors, in which the transistor channel is polymerized into PEDOT through VPP, are also demonstrated to further emphasize on the applicability of this manufacturing approach. The resulting transistor devices are not only functional, they also show remarkable switching behavior with respect to ON current levels (–70 mA at –1 V), ON/OFF ratios (&gt;105), switching times (tens of ms) and transconductance values (&gt;100 mS) in standalone transistor devices, in addition to a high amplification factor (&gt;30) upon integration into a screen printed inverter circuit. © 2022 The Authors. 

Place, publisher, year, edition, pages
John Wiley and Sons Inc, 2022
Keywords
Conducting polymers, Flexible electronics, Polymerization, Screen printing, Styrene, Substrates, Surface roughness, Transistors, Advanced material technologies, Conductive Polymer, Electronic component, Ethylenedioxythiophenes, Flexible substrate, Polymer patterns, Polymerization process, Printed electronics, Screen-printed, Vapor phase polymerization, Oxidants
National Category
Materials Chemistry
Identifiers
urn:nbn:se:ri:diva-59102 (URN)10.1002/admt.202101665 (DOI)2-s2.0-85122392869 (Scopus ID)
Note

Funding details: Stiftelsen för Strategisk Forskning, SSF; Funding details: Horizon 2020, 825339; Funding text 1: This project was financially supported by the Swedish Foundation for Strategic Research and the European Union's Horizon 2020 research and innovation programme under the grant agreement no. 825339 – WEARPLEX.

Available from: 2022-04-13 Created: 2022-04-13 Last updated: 2023-06-07Bibliographically approved
Brooke, R., Petsagkourakis, I., Wijeratne, K. & Andersson Ersman, P. (2022). Electrochromic Displays Manufactured by a Combination of Vapor Phase Polymerization and Screen Printing. Advanced Materials Technologies, 7(8), Article ID 2200054.
Open this publication in new window or tab >>Electrochromic Displays Manufactured by a Combination of Vapor Phase Polymerization and Screen Printing
2022 (English)In: Advanced Materials Technologies, E-ISSN 2365-709X, Vol. 7, no 8, article id 2200054Article in journal (Refereed) Published
Abstract [en]

Smart label technology such as indicators is a growing field due to society's demand for Internet of Things devices. New materials and technologies are continuously being discovered and developed in order to provide better resolution, better performance, or more environmentally friendly devices. Within this report, screen printing technology is combined with vapor phase polymerization to synthesize three conductive polymers; poly(3,4-ethylenedioxythiophene) (PEDOT), polypyrrole (PPy), and polythiophene (PTh). The conductive polymers are created in micrometer resolution and investigated for their electrochromic properties. PEDOT and PPy samples are combined into printed, laminated, transmissive electrochromic displays. The technology is further advanced to establish separate PEDOT, PPy, and PTh all-printed electrochromic displays using several screen printed layers. The PEDOT displays show improved color retention as compared to displays created with commercially available PEDOT:poly(styrene sulfonate) (PSS) with comparable contrast and switching behavior. All-printed PPy and PTh electrochromic displays with impressive electrochromic behavior are demonstrated. More complex patterns of 7-segment displays are created, thereby highlighting flexibility and individually switched sections of the conductive polymers. This research extends the screen printing and vapor phase polymerization combination to other conductive polymers and the potential commercialization of multicolor electrochromic displays that has been otherwise dominated by monochromatic PEDOT:PSS. 

Place, publisher, year, edition, pages
John Wiley & Sons, 2022
Keywords
organic electrochromic displays, PEDOT, PPy, printed electronics, screen printing, smart windows, vapor phase polymerization, Electrochromism, Phosphorus compounds, Polymerization, Polypyrroles, Styrene, (PEDOT), polypyrrole, Conductive Polymer, Electrochromic displays, Ethylenedioxythiophenes, Organic electrochromic display, Organics, Poly(3, 4-ethylenedioxythiophene), Conducting polymers
National Category
Materials Chemistry
Identifiers
urn:nbn:se:ri:diva-59063 (URN)10.1002/admt.202200054 (DOI)2-s2.0-85126551373 (Scopus ID)
Note

 Funding details: Stiftelsen för Strategisk Forskning, SSF; Funding text 1: This work was financially supported by the Swedish Foundation for Strategic Research.

Available from: 2022-04-21 Created: 2022-04-21 Last updated: 2023-10-31Bibliographically approved
Organisations
Identifiers
ORCID iD: ORCID iD iconorcid.org/0000-0001-8485-6209

Search in DiVA

Show all publications