Ändra sökning
Länk till posten
Permanent länk

Direktlänk
Publikationer (2 of 2) Visa alla publikationer
Forssén, C., Silander, I., Zakrisson, J., Amer, E., Szabo, D., Bock, T., . . . Zelan, M. (2023). Demonstration of a Transportable Fabry–Pérot Refractometer by a Ring-Type Comparison of Dead-Weight Pressure Balances at Four European National Metrology Institutes. Sensors, 24(1), Article ID 7.
Öppna denna publikation i ny flik eller fönster >>Demonstration of a Transportable Fabry–Pérot Refractometer by a Ring-Type Comparison of Dead-Weight Pressure Balances at Four European National Metrology Institutes
Visa övriga...
2023 (Engelska)Ingår i: Sensors, E-ISSN 1424-8220, Vol. 24, nr 1, artikel-id 7Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Fabry–Pérot-based refractometry has demonstrated the ability to assess gas pressure with high accuracy and has been prophesized to be able to realize the SI unit for pressure, the pascal, based on quantum calculations of the molar polarizabilities of gases. So far, the technology has mostly been limited to well-controlled laboratories. However, recently, an easy-to-use transportable refractometer has been constructed. Although its performance has previously been assessed under well-controlled laboratory conditions, to assess its ability to serve as an actually transportable system, a ring-type comparison addressing various well-characterized pressure balances in the 10–90 kPa range at several European national metrology institutes is presented in this work. It was found that the transportable refractometer is capable of being transported and swiftly set up to be operational with retained performance in a variety of environments. The system could also verify that the pressure balances used within the ring-type comparison agree with each other. These results constitute an important step toward broadening the application areas of FP-based refractometry technology and bringing it within reach of various types of stakeholders, not least within industry.

Nationell ämneskategori
Elektroteknik och elektronik
Identifikatorer
urn:nbn:se:ri:diva-70575 (URN)10.3390/s24010007 (DOI)
Anmärkning

This work has received funding from the EMPIR programme (QuantumPascal, 18SIB04), which is co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation programme. It has also been received funding from the European Partnership on Metrology, co-financed from the European Union’s Horizon Europe Research and Innovation Programme and by the Participating States. (Funder name: European Partnership on Metrology; Funder ID: 10.13039/100019599; Grant number: 22IEM04 MQB-Pascal. This research was additionally funded by Vetenskapsrådet (VR) grant number 621-2020-05105, Umeå University Industrial doctoral school within the IDS-18 programme, and the Vinnova Metrology Programme grant numbers 2018-04570 and 2019-05029

Tillgänglig från: 2024-01-22 Skapad: 2024-01-22 Senast uppdaterad: 2024-05-27Bibliografiskt granskad
Forssen, C., Silander, I., Szabo, D., Jönsson, G., Bjerling, M., Hausmaninger, T., . . . Zelan, M. (2020). A TRANSPORTABLE REFRACTOMETER FOR ASSESSMENT OF PRESSURE IN THE KPA RANGE WITH PPM LEVEL PRECISION. Acta IMEKO, 9(5), 287-292
Öppna denna publikation i ny flik eller fönster >>A TRANSPORTABLE REFRACTOMETER FOR ASSESSMENT OF PRESSURE IN THE KPA RANGE WITH PPM LEVEL PRECISION
Visa övriga...
2020 (Engelska)Ingår i: Acta IMEKO, ISSN 2221-870X, Vol. 9, nr 5, s. 287-292Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

A transportable refractometer for assessment of kPa pressures with ppm level precision is presented. It is based on the GAs MOdulation Refractometry (GAMOR) methodology, making it resistant to fluctuations and drifts. At the National Metrology Institute at RISE, Sweden, the system assessed pressures in the 4.3 - 8.7 kPa range with sub-ppm precision (0.5 - 0.9 ppm). The system was thereafter disassembled, packed, and transported 1040 km to Umeå University, where it, after unpacking and reassembling, demonstrated a similar precision (0.8 - 2.1ppm). This shows that the system can be disassembled, packed, transported, unpacked, and reassembled with virtually unchanged performance. 

Nyckelord
Refractometry; Pressure; GAMOR; Transportable
Nationell ämneskategori
Naturvetenskap
Identifikatorer
urn:nbn:se:ri:diva-51980 (URN)
Anmärkning

This project (QuantumPascal, 18SIB04) has received funding from the EMPIR programme co-financed by the Participating States and from the European Union's Horizon 2020 research and innovation programme. The authors acknowledge supportfrom the Swedish Research Council (VR) (ProjectNo. 621-2015-04374); the Umeå University Industrial Doctoral School (IDS); the Vinnova MetrologyProgramme (Project Nos. 2018-04570 and 2019-05029); and the Kempe Foundations (Project No.1823, U12).

Tillgänglig från: 2021-01-19 Skapad: 2021-01-19 Senast uppdaterad: 2024-05-22Bibliografiskt granskad
Organisationer
Identifikatorer
ORCID-id: ORCID iD iconorcid.org/0009-0003-2881-425X

Sök vidare i DiVA

Visa alla publikationer